On Mazdatrix's site it has these listed for rebuild parts for the clutch-type LSD:

27-2590-M020 Cone Spring (2 needed)
27-2560-M020 LSD Disc w/inside pins (4 needed)
27-2580-M020 LSD Disc w/outside pins (4 needed)
Use the high performance parts below for stronger lockup. Interchange these thicker parts
to create a thicker stack, which will have a higher clamping force.
27-2570-M020 LSD Disc w/inside pins +.1mm (Uses 4 - High Performance)
27-2530-M020 Thrust washer +.2mm (Uses 2 - High Performance)


First question is that it says for certain things 2 needed or 4 needed, right? Well when you click on the part number for a price it doesn't indicate whether that is the price for 2 or for 1, I'd assume it is for 2/4 as it states that is what's needed right?

Also, is this a full rebuild? What about the bearings and seals? What other seals or bearings would I need to get? Anyone have any part numbers for these seals/bearings for an s4 N/A LSD?

Thanks for any help.

 

teh bump.

 

back from the dead
anyone did this ?

 

the prices are for each. one disc, multiply by how many you need.

 

I'd measure all the clutches before ordering, maybe all you need is springs and the thrust washer.

 

i plan on rebuilding my t2 diff. as well..

:AA: