Denso injector clips
#1
Denso injector clips FYI
so today i was out looking for some injector clips and finally came accross a knowledgable parts person, while the other guy who originally fumbled around trying to give me the wrong clips he saw this and grabbed a box off the shelf and brought it over, to my surprise they looked perfectly OEM so i figured i would pass along the info since this part number didn't come up with a search and i have seen the universal clips but these are cheaper (cost about $5 each) and better quality.
part # is a Borg Warner(BWD) part: 27427, there is 4 in each box.
these are made for low impedence (S4) injectors but the latter high impedence rectangular plug offset notch injectors can be modified to work with them by simply cutting off the outer lug with a razor blade.
i highly recommend replacing these when pulling the UIM or replacing the motor, the original clips are almost always in crappy shape.
part # is a Borg Warner(BWD) part: 27427, there is 4 in each box.
these are made for low impedence (S4) injectors but the latter high impedence rectangular plug offset notch injectors can be modified to work with them by simply cutting off the outer lug with a razor blade.
i highly recommend replacing these when pulling the UIM or replacing the motor, the original clips are almost always in crappy shape.
Last edited by RotaryEvolution; 02-21-06 at 11:14 PM.
#7
Senior Member
Join Date: Sep 2003
Location: Syracuse New York
Posts: 423
Likes: 0
Received 0 Likes
on
0 Posts
I just got a set from www.rs-autosport.com/ $5.00 each for my 87 tII. the quality and the fit is perfect. Just my 2cents
Trending Topics
#10
FYI, the 90-92 Mazda MX-6 GT (turbo) injector clips will fit the 89-91 S5 460cc and 550cc injectors. I have the 550's on my car right now and they are dimensionally the same (injectors & clips) as the MX-6 GT ones (90-92).
#12
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
Those don't look weather tight. The RS Autosports (as well as the clips available locally in my area) are all weather tight with a gasket sealing the wires as well as a gasket sealing to the injector itself.
#13
they are weather tight, these clips are OEM type, the stock boots that fit over the wires on the stock injector clips can be removed and placed onto these, they also have a rubber seal inside the connector to seal the inside. believe me they are as close to OEM as you can get. i will also see if i can get a part # for new rubber insulator boots for them, you could also just slide heat shring tubing over the wires/clip or a little bit of liquid tape or silicone would seal them up just fine.
with these i just tranferred some hardware off the original injector clips such as the rubber boots and the wire clips and everything was good as new.
with these i just tranferred some hardware off the original injector clips such as the rubber boots and the wire clips and everything was good as new.
#15
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
http://www.rs-autosport.com/
They're just standard injector clips, available almost everywhere.
Hell, if you had Google'd for "rs autosport" it would have been the first hit.
They're just standard injector clips, available almost everywhere.
Hell, if you had Google'd for "rs autosport" it would have been the first hit.
#16
MazdaTruckin.com Founder
Join Date: Mar 2003
Location: East Charlotte, NC
Posts: 402
Likes: 0
Received 0 Likes
on
0 Posts
Injector Connetions
So this connector here will replace the stock connectors on a stock S4 engine?
Took my UIM off to fix my pulsation dampener and found out the car had caught fire once before all the wiring fell appart when I took the primary injectors out.
Took my UIM off to fix my pulsation dampener and found out the car had caught fire once before all the wiring fell appart when I took the primary injectors out.
#18
Full Member
iTrader: (5)
Yes they will fit; I have a set like those on my can now. But only low impedance injectors, 86 and early 87. If look at that clip you will see a little grove molded into the top of the clip in the center. High impedance injectors have that grove offset to one side. You can use those clips on high impedance injectors by cutting off the lug on the injector.
Last edited by T2 vert; 08-27-06 at 07:32 PM.
Thread
Thread Starter
Forum
Replies
Last Post
HalifaxFD
Canadian Forum
126
05-09-16 07:06 PM