Cruise Control Doesnt Work
#2
Trunk Ornament
iTrader: (11)
Take a look at your clutch pedal and see if the plastic button that engages the clutch switch is missing. And yes, there are 2 clutch switches. One is when the clutch pedal is pushed all the way down to start the car, the other is when the clutch pedal is all the way up to allow the cruise to engage.
Mine was broken, so I glued a penny to it. Cheapest repair ever
Mine was broken, so I glued a penny to it. Cheapest repair ever
#3
Make It Happen!
iTrader: (11)
Join Date: Jun 2010
Location: Ontario, Canada
Posts: 522
Likes: 0
Received 0 Likes
on
0 Posts
You can also check the connector at the cruise control actuator, under the hood (passenger firewall/inner fender) and connector FEM-01 under the dash, behind passenger side kick panel.
Check the cable to the throttle body is still connected.
Check the cable to the throttle body is still connected.
#4
Take a look at your clutch pedal and see if the plastic button that engages the clutch switch is missing. And yes, there are 2 clutch switches. One is when the clutch pedal is pushed all the way down to start the car, the other is when the clutch pedal is all the way up to allow the cruise to engage.
Mine was broken, so I glued a penny to it. Cheapest repair ever
Mine was broken, so I glued a penny to it. Cheapest repair ever
AmT T, thanks for the help man, fortunenatly i didnt have to go that far
Thread
Thread Starter
Forum
Replies
Last Post
CaptainKRM
2nd Generation Specific (1986-1992)
14
08-26-15 09:52 PM
smikels
2nd Generation Specific (1986-1992)
3
08-18-15 01:26 PM