couple of quick questions. please help
10-07-07, 10:14 PM
#1
highway to the dangerzone
Thread Starter
Join Date: Jul 2005
Location: indiana
Posts: 295
Likes: 0
Received 0 Likes
on
0 Posts
couple of quick questions. please help
how often has anyone changed a temperature gauge for it showing wrong temperatures.
my gauge never hits high its exactly 3/4 up. my rx7 is always around 1/3.
how can i check for a blown coolant seal.
my gauge never hits high its exactly 3/4 up. my rx7 is always around 1/3.
how can i check for a blown coolant seal.
10-07-07, 10:58 PM
#4
highway to the dangerzone
Thread Starter
Join Date: Jul 2005
Location: indiana
Posts: 295
Likes: 0
Received 0 Likes
on
0 Posts
no, gauge just sits at 3/4 high. i have seen my buddy max his gauge at H. mine sits at 3/4. never goes any higher. sounds bad. but i just bought it and i just jumped it and was talking to the owner. i told him just let it run. it has 2 fans on it and both run constantly. then we heard the water level light buzzer go off. so i ran and checked it was low i put water in the over flow and the light went off. now idk. have to check everything.
10-07-07, 11:13 PM
#5
Uhhhhhh....... you are'nt talking about the stock guages then are you? I hope not. Cuz if you're buddy "maxes" his out at H routinely on the stock guage, then either:
a) the guage is busted
b) your buddy is looking at a blown coolant seal or warped housings pretty soon!
a) the guage is busted
b) your buddy is looking at a blown coolant seal or warped housings pretty soon!
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Shainiac
Single Turbo RX-7's
12
07-17-19 02:20 PM