I have these parts ready...

*Four 3inch Couplers
*Apexi Power Intake Filter
*Prelude CAI Piping

I have a general idea of how to do it but...im sort of confused about where the AFM goes??? I have a S5 btw.

 

I searched for "how to prelude CAI" and came up with this thread. It has links to pictures:

https://www.rx7club.com/forum/showth...ht=prelude+cai

 

I can't attach the prelude piping to the apexi intake filter...how do I do so?

 

do you guys think it will fall off? I'm doing the fenderwell Cai mod...where the filter will be hanging down low

 

Between the filter and the TB, just like before...

Judging by the empty threaded holes and lack of attachment neck, it looks like you're missing an important part of the filter. Take it back to where you got it and ask for the rest of it.

Click here and scroll down to the paragraph at the very bottom..

 

heres the adapter that your talking about...but it's not needed anymore since im doing a CAI mod instead of a intake. Even with it on, the piping doesnt go in!

 

sounds like you might need a different filter or fabrication

 

hmm does anyone here have a apexi power intake filter? I ordered the 1989-1991 version(only version) and heard people had no problems...doing the cai mod

 

should i use couplers? try to sand down the adapter???

 

The coupler in post #4 will make the air seal, but the filter will still need a bracket to keep it from falling off.
Just fabricate a bracket that bolts to one of the adapter flange holes & mounts to the car.

 

do you get any Hp from doing this???

 

from what i have read...yes you do! because you are sucking in hot air if you just leave it sitting in the engine bay. It's been dyno proven that you will lose power if you don't have a cold air box/ cai mod

also...did I buy the wrong PIPE!? I bought the 92 96 93 94 95 Honda Prelude Short Ram Air Intake Kit but the problem is the 3" couplers are a little to big for the piping!!! heres what i bought PIPING