Clock Not working, Resets?
07-21-03, 10:39 AM
#1
MENDOZA!!!!!!!!!!!!!!!!!!
Thread Starter
Clock Not working, Resets?
I tried researching this and i couldn't find the answer please help. My clock sometimes doesn’t turn on, i.e. doesn’t light up. Sometimes it does but it doesn’t keep the right time. It seems that every once in a while it resets itself to 1:00, I know this isn’t the biggest problem in the world but I am curious as to whether it could become a bigger problem, or is indicative of a bigger electrical problem. Thanks in advance.
07-21-03, 10:41 AM
#2
casio isn't here.
Join Date: Sep 2002
Location: Greenpoint, Brooklyn
Posts: 3,332
Likes: 0
Received 0 Likes
on
0 Posts
yeah, i have the same problem. most everyone does. its some bad solder points typically, but i'm not sure which ones. its such a typical problem, it should damn near be a 'sticky.'
07-21-03, 10:52 AM
#3
Former Moderator. RIP Icemark.
If the clock is not working correctly, the problem can generally be traced to either blown (or removed) room fuse or cold solder joints in the idiot light/clock panel.
07-21-03, 11:03 AM
#4
RX7 FOR LIFE! **D
Join Date: Apr 2003
Location: Clemson University
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
If it is the cold solder joints, To fix the problem you have to pull the idiot/clock cluster out. Take the 3 screw out of the back of the idiot/clock cluster. Pull the backing off. Then you need to resolder the backs of the termrial where the connector plugs in.
07-21-03, 11:09 AM
#5
MENDOZA!!!!!!!!!!!!!!!!!!
Thread Starter
Um, I know I sound dumb, but what is a room fuse and what does it do? Thanx a lot, you guys are really helpful, I am truly unskilled when it comes to my cars, but I am trying to learn and thanx to you guys I am accomplishing this.
07-21-03, 11:42 AM
#6
one of the fuses in the fuse panel will be marked ROOM, find it and see if it's blown.
But if your clock works sometimes, then chances are pretty good that that fuse is fine, and it's a bad solder joint.
replace the clock/idiot light assembly or repair it if you're handy with a solder iron.
But if your clock works sometimes, then chances are pretty good that that fuse is fine, and it's a bad solder joint.
replace the clock/idiot light assembly or repair it if you're handy with a solder iron.
Trending Topics
07-21-03, 11:58 AM
#8
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
The idiot light cluster needs to be resoldered. Cold solder joints cause this problem. There's a small chance a cluster out of the wrecking yard will be good. Small chance.
07-21-03, 01:16 PM
#11
Yar-Har-Har
Join Date: Sep 2002
Location: Nashville, 37217
Posts: 1,954
Likes: 0
Received 0 Likes
on
0 Posts
you might wanna check ebay, or the parts section on this forum....just start a thread asking for it...im sure you'll get some sort of response.....with all the wrecked and parted out 2nd gens, im sure that wont be too hard to find
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
