RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   Clock Not working, Resets? (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/clock-not-working-resets-207447/)

chexmix78 07-21-03 10:39 AM

Clock Not working, Resets?
 
I tried researching this and i couldn't find the answer please help. My clock sometimes doesn’t turn on, i.e. doesn’t light up. Sometimes it does but it doesn’t keep the right time. It seems that every once in a while it resets itself to 1:00, I know this isn’t the biggest problem in the world but I am curious as to whether it could become a bigger problem, or is indicative of a bigger electrical problem. Thanks in advance.

casio 07-21-03 10:41 AM

yeah, i have the same problem. most everyone does. its some bad solder points typically, but i'm not sure which ones. its such a typical problem, it should damn near be a 'sticky.'

Icemark 07-21-03 10:52 AM

If the clock is not working correctly, the problem can generally be traced to either blown (or removed) room fuse or cold solder joints in the idiot light/clock panel.

derek1987 07-21-03 11:03 AM

If it is the cold solder joints, To fix the problem you have to pull the idiot/clock cluster out. Take the 3 screw out of the back of the idiot/clock cluster. Pull the backing off. Then you need to resolder the backs of the termrial where the connector plugs in.

chexmix78 07-21-03 11:09 AM

Um, I know I sound dumb, but what is a room fuse and what does it do? Thanx a lot, you guys are really helpful, I am truly unskilled when it comes to my cars, but I am trying to learn and thanx to you guys I am accomplishing this.

Terrh 07-21-03 11:42 AM

one of the fuses in the fuse panel will be marked ROOM, find it and see if it's blown.

But if your clock works sometimes, then chances are pretty good that that fuse is fine, and it's a bad solder joint.

replace the clock/idiot light assembly or repair it if you're handy with a solder iron.

chexmix78 07-21-03 11:45 AM

Cool Thanx

HAILERS 07-21-03 11:58 AM

The idiot light cluster needs to be resoldered. Cold solder joints cause this problem. There's a small chance a cluster out of the wrecking yard will be good. Small chance.

Fitness Stain 07-21-03 12:09 PM

your best off just getting someone to resolder the joints....everyone that has done it, apparently has a working idiot cluster.....

Rotory 07-21-03 12:40 PM

i know its a little off topic. anyone have the cover for the stock fuse box by the driver side kick panel??

Fitness Stain 07-21-03 01:16 PM

you might wanna check ebay, or the parts section on this forum....just start a thread asking for it...im sure you'll get some sort of response.....with all the wrecked and parted out 2nd gens, im sure that wont be too hard to find


All times are GMT -5. The time now is 06:55 AM.


© 2024 MH Sub I, LLC dba Internet Brands