car wont start...clicking?
#1
Full Member
Thread Starter
Join Date: Aug 2003
Location: Columbus/Cleveland OH
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
car wont start...clicking?
I'm having a little trouble with my 7. I was hoping that someone here has experienced this problem before and knows whats up. So here goes.
Car won't start. Doesnt turn over. This just started, the car was fine yesterday. Now it just makes an very loud VERY rapid clicking noise when ever I turn the key. I took the battery to have it tested. Batteries good. I don't know what to check next. I don't want to go through a million things to test so if someone had this problem before please let me know!
Car won't start. Doesnt turn over. This just started, the car was fine yesterday. Now it just makes an very loud VERY rapid clicking noise when ever I turn the key. I took the battery to have it tested. Batteries good. I don't know what to check next. I don't want to go through a million things to test so if someone had this problem before please let me know!
#2
Boost ahoy!
Join Date: Jan 2006
Location: Joplin, MO
Posts: 968
Likes: 0
Received 0 Likes
on
0 Posts
Through a search, some people have mentioned the started among a few other things. This thread looks promising, though.
https://www.rx7club.com/showthread.p...start+clicking
https://www.rx7club.com/showthread.p...start+clicking
#4
You could clean all the battery cables. Also check the connection at the starter. Clean it then Use some dielectric grease.
RotaryResurection has a great write-up on how to make your own custom cables.
RotaryResurection has a great write-up on how to make your own custom cables.
#5
read this post it will solve the starter clicking relay problem for 3 dollars read carefully it may help hotstart like it fixed mine no more clicking added bonus no more flooding.....
how many people have fixed flooding issues and what method worked ( 1 2 3 4 5 ... Last Page)
how many people have fixed flooding issues and what method worked ( 1 2 3 4 5 ... Last Page)
#6
I had this problem on my 91. I hit a speed bump at the mall too fast (young and dumb 10 years ago) I didn't think anything of it until I came out of the mall later and it wouldn't start. Turned out that the starter lead had a bad connection and the jolt of the speed bump was enough to knock it just loose enough that it barely had any connection at all.
Of course I learned this AFTER I shelled out $60 for a new battery when jumping it didn't help.
Of course I learned this AFTER I shelled out $60 for a new battery when jumping it didn't help.
#7
Full Member
Thread Starter
Join Date: Aug 2003
Location: Columbus/Cleveland OH
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
dennis_blackstone...what post are you referring too?
Thanks for everyones suggestions. I will give them all a try tomorrow. Ibrakestuff, what do you mean try jumpers? Do you mean make a direction connection to the starter or do you mean try jumping the car? 'Cause I tried jumping the car and that didnt work.
Thanks for everyones suggestions. I will give them all a try tomorrow. Ibrakestuff, what do you mean try jumpers? Do you mean make a direction connection to the starter or do you mean try jumping the car? 'Cause I tried jumping the car and that didnt work.
Trending Topics
#9
Convertible FTW! IM ME!!!
Join Date: Aug 2007
Location: Rowland Hts
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
My car once didn't start after I turned it off. I don't know if we have the same problem, but when it doesn't start for me, I just hold the key as if starting the car, and step on the clutch repeatedly until the engine turns.
#12
RE_p Rotors
iTrader: (7)
Join Date: Dec 2006
Location: Newport News/Fredericksburg
Posts: 950
Likes: 0
Received 0 Likes
on
0 Posts
would say neg turminal not fastened down but you would just get one click then all lights go out...so like everyone else says sheck the starter conection...i thing there is and electrical plug and then a wire with oval washer on back side held down with nut..
#13
Full Member
Thread Starter
Join Date: Aug 2003
Location: Columbus/Cleveland OH
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Well took the starter out today and had it checked. Starter is good. I guess thats good, cause I didnt want to buy a new one. Now I'm stumped on what to check next. I checked all the connections. whats next on the list?
#14
Full Member
Thread Starter
Join Date: Aug 2003
Location: Columbus/Cleveland OH
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Update. ITS STILL NOT WORKING!
So after not working on it for 1 day, it tried to start today. It turned over for a bit and then smelled and smoked (smelled like oil)....a lot. So it turned over for a while then started clicking again. WHAT THE HECK!
So after not working on it for 1 day, it tried to start today. It turned over for a bit and then smelled and smoked (smelled like oil)....a lot. So it turned over for a while then started clicking again. WHAT THE HECK!
#15
Full Member
Thread Starter
Join Date: Aug 2003
Location: Columbus/Cleveland OH
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
UPDATE on my Update
Got it working. I guess I flooded it at some point, so I had my friend push me around for about 1.5 (got a lot of weird looks) before it finally started it up.
so yeah, it was just flooded.
Got it working. I guess I flooded it at some point, so I had my friend push me around for about 1.5 (got a lot of weird looks) before it finally started it up.
so yeah, it was just flooded.
Thread
Thread Starter
Forum
Replies
Last Post
fastrx7man
3rd Generation Specific (1993-2002)
33
09-02-15 09:42 PM
smikels
2nd Generation Specific (1986-1992)
3
08-18-15 01:26 PM