2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Car will not start!

Thread Tools
 
Search this Thread
 
Old May 10, 2005 | 12:21 PM
  #1  
FGFan's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Sep 2003
Posts: 74
Likes: 0
From: Ohio
Car will not start!

Okay guys. Hes the dilly-o

A friend gave me a turbo2 that he dosent want to deal with anymore. Hes gonna go buy a RX7 from another guy locally.

Anywyas the cars been sitting for 4 years ran before parked now dosent run

When you try and turn it over it sounds like it wants to turn over but dosent want too. Ive replaced so far:

Gas
Battery
Plugs/Wires
Fuses

Also It seems like some guy messed with the nuetral safty switch when you try to turn the car over while its in gear the car will move..dunno..any suggestions would be great.

oh yeah the car is a 87 turbo2. with 150k miles.
Reply
Old May 10, 2005 | 12:37 PM
  #2  
torean's Avatar
vac leak
Tenured Member 15 Years
 
Joined: Aug 2003
Posts: 1,247
Likes: 0
From: Rutgers
oil/filter?...might be a good idea to put some atf in the plug holes....why did he let it sit that long??!?!....
Reply
Old May 10, 2005 | 12:39 PM
  #3  
classicauto's Avatar
Crash Auto?Fix Auto.
Tenured Member 15 Years
iTrader: (3)
 
Joined: May 2003
Posts: 7,831
Likes: 2
From: Hagersville Ontario
Originally Posted by FGFan
When you try and turn it over it sounds like it wants to turn over but dosent want too.
it wants to but it doesn't want to?
could you elaborate a little bit please...
is it getting fuel? spark?
does it have compression?
Reply
Old May 10, 2005 | 01:14 PM
  #4  
13b4me's Avatar
Banned. I got OWNED!!!
 
Joined: Aug 2004
Posts: 8,789
Likes: 2
From: Jacksonville, NC
If that car sat for 4 years, you're LUCKY it's not seized!!!
Remove the upper plug holes and put some ATF in it, as stated above...
Usually helps to build compression...
Reply
Old May 10, 2005 | 01:45 PM
  #5  
HAILERS's Avatar
HAILERS
Tenured Member 10 Years
 
Joined: May 2001
Posts: 20,563
Likes: 27
From: FORT WORTH, TEXAS,USA
If you get in the car, and push the clutch in, then try to start the car with the shift lever in any gear, the car should not move. It has nothing to do with the clutch switch but EVERYTHING to do with a worn out clutch.

Remove and replace the clutch disc and pressure plate and try again.

Then again the clutch hydraulics could be shot. Not enough information in this post to tell.

Last edited by HAILERS; May 10, 2005 at 01:49 PM.
Reply
Old May 10, 2005 | 06:46 PM
  #6  
FGFan's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Sep 2003
Posts: 74
Likes: 0
From: Ohio
Sorry for not being specific..The car is getting fuel, and spark.

The engine is wanting to turn over, its just not starting.

As for the car moving..when the clutch is NOT depressed and its in gear the car will move.

I even tried the unflood trick dident work. Ill get some ATF and try that tommrow.

Thanks for the help.
Reply
Old May 10, 2005 | 07:05 PM
  #7  
torean's Avatar
vac leak
Tenured Member 15 Years
 
Joined: Aug 2003
Posts: 1,247
Likes: 0
From: Rutgers
hows it possible to just park a running FC and not touch it for 4 years?.......thats like putting crack infront of me and tell me not to smoke it...
Reply
Old May 10, 2005 | 07:32 PM
  #8  
13b4me's Avatar
Banned. I got OWNED!!!
 
Joined: Aug 2004
Posts: 8,789
Likes: 2
From: Jacksonville, NC
Originally Posted by FGFan
As for the car moving..when the clutch is NOT depressed and its in gear the car will move.
Man have you ever driven a manual before?
You can't start it without the clutch depressed when it's in gear... LMAO
What do you expect to happen? Not trying to be a dick or anything...
Reply
Old May 10, 2005 | 07:40 PM
  #9  
FGFan's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Sep 2003
Posts: 74
Likes: 0
From: Ohio
Nuetral safty switch..You can bypass it so you dont have to depress the clutch my friend when trying to start the car
Reply
Old May 10, 2005 | 08:02 PM
  #10  
13b4me's Avatar
Banned. I got OWNED!!!
 
Joined: Aug 2004
Posts: 8,789
Likes: 2
From: Jacksonville, NC
But not when it's IN GEAR!!!!!!!!! LOLOLOL
Reply
Old May 11, 2005 | 08:20 AM
  #11  
FGFan's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Sep 2003
Posts: 74
Likes: 0
From: Ohio
LOLOL but dont you FIND it odd it MOVES when its in gear! LOLOLOL!

I do..and your mean
Reply
Old May 11, 2005 | 09:03 AM
  #12  
zeromage428's Avatar
BWAAA
Tenured Member 10 Years
 
Joined: Jan 2004
Posts: 1,167
Likes: 0
From: sofla-this isnt naxxramas
how can it move when its in gear??? seems to me somewhere the tranny is meeting up to the engine like pressure plate or something is gone...idk...just a noob guess trying to help another 7 owner out
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
Kyo
2nd Generation Specific (1986-1992)
6
Apr 13, 2019 09:24 AM
torky007
3rd Generation Specific (1993-2002)
7
Aug 17, 2015 05:14 PM




All times are GMT -5. The time now is 06:31 PM.