Can't find this gasket
#1
Shelby Tuner & FC badass
Thread Starter
Join Date: Apr 2002
Location: Seminole, Florida
Posts: 1,101
Likes: 0
Received 0 Likes
on
0 Posts
Can't find this gasket
We ordered a 3.15" downpipe for the turbo car.
we also got a 3" flange, so we can weld the flange on to some 3" piping and be able to bolt and unbolt the system.
I can not find those 3" exhaust gaskets.
I tried MazdaTrix and RB and I couldn't find them.
Does anyone know where I can get a 3" gasket for our high temp systems????
Thanks everybody!!!!
we also got a 3" flange, so we can weld the flange on to some 3" piping and be able to bolt and unbolt the system.
I can not find those 3" exhaust gaskets.
I tried MazdaTrix and RB and I couldn't find them.
Does anyone know where I can get a 3" gasket for our high temp systems????
Thanks everybody!!!!
Last edited by GLHS; 09-18-02 at 01:29 PM.
#2
Shelby Tuner & FC badass
Thread Starter
Join Date: Apr 2002
Location: Seminole, Florida
Posts: 1,101
Likes: 0
Received 0 Likes
on
0 Posts
Can I make a gasket out of several layers of copper cut to correct size?
I was curious, because I made a gasket years ago for my N/A and it has held up perfectly and never leaked, but I am not sure, if it will handle the amount of heat the turbo will put out.
I was curious, because I made a gasket years ago for my N/A and it has held up perfectly and never leaked, but I am not sure, if it will handle the amount of heat the turbo will put out.
Thread
Thread Starter
Forum
Replies
Last Post
kkev.7788
2nd Generation Specific (1986-1992)
7
09-02-15 01:32 PM