i remember seeing a CAI write up for the seven.. but it was only the S4.. so i was wondering if there was one for the S5.. also if possible the write up on the item to get and the spec of the piping and bends too as well.. thanks..tried searching but the buutom is not working on me.. keeps dying.. but thanks guys!..

 

The only difference between s4 and s5 is the AFM, the s5 doesn't need the AFM adapter like the s4 needs. Therefore, any write-up for an s4 CAI will work for an s5 (minus the adapter). That being said, here are a couple write-ups:

http://www.nopistons.com/forums/inde...&hl=custom+CAI

https://www.rx7club.com/showthread.p...hreadid=305195


I used the info in the first link to make mine, but one word of advice, it didn't work out the same way for me as the person that did the write-up in the first link did. That was because I, stupidly, drilled the hole before checking exactly where the pipe would end up. I just drilled it where i thought it would go, and ended up being wrong. I still got it to work, but I just thought you should know that if it doesn't work out exactly like a write-up be prepared to have to do some fabbing. Good luck, hope those help.

 

thanks!..