buttons for ignition?
10-02-02, 10:00 PM
#1
Senior Member
Thread Starter
Join Date: Sep 2002
Location: Washington
Posts: 422
Likes: 0
Received 0 Likes
on
0 Posts
buttons for ignition?
hey guys instead of using the key and ignition switch (that i just removed) on my steering column, i want to have some switches instead im going to make a dash too so no worries on where to put them.
But i need to know what kind of switch to use for my ignition and what kind of button to use for my starter?
If anyone knows some part #s or something that would help alot.
thx
But i need to know what kind of switch to use for my ignition and what kind of button to use for my starter?
If anyone knows some part #s or something that would help alot.
thx
10-02-02, 10:51 PM
#4
Banned. I got OWNED!!!
Join Date: Feb 2001
Location: Illinois
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Summit sells just the button for 7.99. Pegasus Racing Supplies is cheaper on the toggle switches. You may find them cheapest at a hardware store, though. Painless (Wiring) sells a panel w/ push button start, ign., and one accy. for 73.99 already mounted in a panel and with lights. It's obviously cheaper to build your own panel.
10-03-02, 12:48 AM
#7
Senior Member
Thread Starter
Join Date: Sep 2002
Location: Washington
Posts: 422
Likes: 0
Received 0 Likes
on
0 Posts
lol actually im putting ignitions switches and the such on my car i just removed the column lock/ignitions switch off of my car.
if you want to do this alls you need is a chisle a hammer and a screwdriver
you notch some groves on the top of the screws and then unscrew it with a screwdriver..after that just unplug the plugs. but you have to have something in lue of the ignition switch.
if you want to do this alls you need is a chisle a hammer and a screwdriver
you notch some groves on the top of the screws and then unscrew it with a screwdriver..after that just unplug the plugs. but you have to have something in lue of the ignition switch.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post