Broke bolt holding wire from firewall to bellhousing.
#1
Powered By Trochoids
Thread Starter
Join Date: Oct 2004
Location: Philly | PA
Posts: 1,457
Likes: 0
Received 0 Likes
on
0 Posts
Broke bolt holding wire from firewall to bellhousing.
So Im in the process of redoing my grounds and when to take out the bolt that holds the wire onto the bellhousing which runs to the firewall. Unfortunately the bolt head snapped off, how big of an issue is it if i dont have this ground, but a 4awg ground running from the EFI harness to that same firewall location?
Last edited by Mindspin311; 03-08-06 at 01:53 PM.
#3
Powered By Trochoids
Thread Starter
Join Date: Oct 2004
Location: Philly | PA
Posts: 1,457
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SureShot
No biggie.
You can attach it somewhere near by.
The LIM or UIM are both suitable.
You can attach it somewhere near by.
The LIM or UIM are both suitable.
#5
Finally I have LSD
Join Date: Jul 2003
Location: Los Angeles
Posts: 528
Likes: 0
Received 0 Likes
on
0 Posts
If you get a chance rewire the ground with a bigger wire or even put more grounds on the car. I am not saying it to be rice but those extra grounds helps in our cars.
Thread
Thread Starter
Forum
Replies
Last Post
smikels
2nd Generation Specific (1986-1992)
3
08-18-15 01:26 PM