Anyone surf the Tirerack.com website recently? They have a listing for brembo rear rotors. I looked at the 2005 Brembo catalog and it does not show any listing for a rear brake rotor for any rx7 regardless of year. Anyone bought them and are running them? Got a brembo part number?

Tirerack page:
http://www.tirerack.com/brakes/resul...emium&x=75&y=6

reference thread:
https://www.rx7club.com/showthread.p...ghlight=brembo

 

ive got KVR slotted and cross drilled rotors all around - its my understanding that KVR bought Brembo...i could very well be wrong however

BUT they aren't oversized, they're stock excpet for the holes and slots any half *** performance shop should be able to hook ya up

 

I think you've been misinformed.
KVR uses Brembo blanks. They then either slot or cross-drill those blanks.


Brembo makes a lot of OE replcement rotors and brake parts.

If you go to the Brembo site and download their PDF catalogue for "Aftermarket" parts, and not the "Performance" parts, then you'll see all the info about the RX7 brakes there.

http://www.brembo.com/NR/rdonlyres/6...alog101104.pdf


RX7 With Rear Disks:
1986 - 1988 5 Lug; Excludes Turbo 25362 @ VD 276.0 20.0 65.0 25621 VD 273.0 18.0 53.0

5 Lug; Turbo 25362

1989 - 1992 w/ Solid Rear Disc 25362

 

i just installed Brembo blanks in the rear.

 

where did you buy them from? do you happen to still have the box with the part number sticker still on it? care to type in the part number into this thread?

 

i got them for 53 bux off of www.nopi.com
Part Number: 437+1826
left and right are interchangeable.....

 

what part number did the box have? I Think that is a NOPI part number for their website...

Brembo part number should be something like 09.5364.10 (that is for the front rotor actually)

 

i don't have the boxes anymore......

 

Are there only 5 holes (one hole for each wheel stud) or does it have like 12 holes or whatever so it's universal?

 

7 holes....5 for the lugs and 2 for the screws to hold it in place.

 

thanks for all the info. I blieve Nick86 nailed it on the bulls eye with that part number. Will find out from a distributor is that number makes sense tommorrow

 

from tirerack. they are real brembo's and are the right rotors for the backs of our fc's. sorry its a little blury. the numbers on the very bottom are just the same as the mazda number (FB05 asdlfjbasvduiBvlskdbvj....somethin like that, go to mazdatrix)

 

is the mazda number say "FB05-26-251A"
Do they come with a TUV 5000 certificate?

 

....................???? fill me in on what this is............

 

TUV is the german equivilent to american safety certs for automobiles far as I know.

 

Brembo does make blanks for FC (front and rear).

Yes they are TUF approved!