2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Brake Light!

Thread Tools
 
Search this Thread
 
Old Sep 29, 2005 | 04:39 PM
  #1  
Torch101's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jul 2005
Posts: 148
Likes: 0
From: U.S.
Brake Light!

My brake warning light comes on when I take wide turns and shuts off a second later. I am not talking about the Hand-Brake light theres another brake light that comes on next to the warning belt light.
Reply
Old Sep 29, 2005 | 04:41 PM
  #2  
Torch101's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jul 2005
Posts: 148
Likes: 0
From: U.S.
What i'm asking here is, will it be a problem?
Reply
Old Sep 29, 2005 | 04:41 PM
  #3  
1987RX7guy's Avatar
Eat Rice Don't Drive it.
Tenured Member: 20 Years
iTrader: (3)
 
Joined: Nov 2002
Posts: 12,752
Likes: 1
From: Laredo, Tx
Is it an ABS light? Other than that I've never seen ANOTHER brake light in the idiot cluster. The brake light usually comes on when you're low on brake fluid. Hard turns would probably trip the sensor since the fluid will slosh around.
Reply
Old Sep 29, 2005 | 04:43 PM
  #4  
Torch101's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jul 2005
Posts: 148
Likes: 0
From: U.S.
Strange, the brake fluid cylinder is at the max.
Reply
Old Sep 29, 2005 | 05:18 PM
  #5  
beefhole's Avatar
Boosted. I got BLOWN!!!
Tenured Member: 20 Years
iTrader: (29)
 
Joined: Sep 2003
Posts: 3,742
Likes: 1
From: Queens, NY
Even if it's fairly full, it may still come on. Mine has a very slow leak at the reservoir. Even when it's still between min and max, the light will come on. Try putting a little more in and see if that helps.
Reply
Old Sep 29, 2005 | 07:21 PM
  #6  
breckboarder55's Avatar
big port + big turbo=
Tenured Member 10 Years
 
Joined: Apr 2005
Posts: 661
Likes: 0
From: 10 mins from Texas World Speedway
there is an idiot light that come on when it sences one of the tail lights out
i had it come on replaced the out tail light and now it works fine, kaje sure one of your bulbs didnt come loose?
Reply
Old Sep 30, 2005 | 12:59 AM
  #7  
NZConvertible's Avatar
I'm a boost creep...
Tenured Member 05 Years
 
Joined: Jan 2002
Posts: 15,608
Likes: 8
From: Auckland, New Zealand
Covered many times before, but once again...

The BRAKE warning light comes on when the handbrake is on OR the brake fluid reservior is low.

The STOP warning light (S4's only) comes on if a brake light bulb has failed.
Reply
Old Oct 2, 2005 | 07:11 PM
  #8  
Torch101's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jul 2005
Posts: 148
Likes: 0
From: U.S.
Originally Posted by NZConvertible
Covered many times before, but once again...

The BRAKE warning light comes on when the handbrake is on OR the brake fluid reservior is low.

The STOP warning light (S4's only) comes on if a brake light bulb has failed.

My handbrake was off and the brake fluid reservior is at MAX, again I'm not talkng about the hand-brake signal. I have an S5 model as well so that elimnates the stop warning light.

Heres a picture of what I'm talking about.


A signal called Brake appears in between Belts and Washer. This is the light I am talking about, not the brake light at the bottom left corner. Although I am not so sure if its called Brake since the observation was from a friend in the passenger seat when we were driving. I'm not sure if I have ABS either...

*This picture was taken when the key was in the ON posistion*

Last edited by Torch101; Oct 2, 2005 at 07:15 PM.
Reply
Old Oct 2, 2005 | 08:54 PM
  #9  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
The "brake" light comes on for one of two reasons on a S5... hand brake on, or low brake fluid.

If you have checked both those, and it is still on, then you have a short at the sensor of one or the other, but the fact that it only comes on while cornering, suggests without any doubt that you are low on brake fluid. are you sure you are checking the brake and not the clutch?
Reply
Old Oct 2, 2005 | 10:17 PM
  #10  
Torch101's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jul 2005
Posts: 148
Likes: 0
From: U.S.
Originally Posted by Icemark
The "brake" light comes on for one of two reasons on a S5... hand brake on, or low brake fluid.

If you have checked both those, and it is still on, then you have a short at the sensor of one or the other, but the fact that it only comes on while cornering, suggests without any doubt that you are low on brake fluid. are you sure you are checking the brake and not the clutch?
Yes! I'm 100% sure I am checking the Brake Master Cylinder. Can you please tell me , if you know, what warning light is usually in between the Belts and Washer
Reply
Old Oct 2, 2005 | 10:44 PM
  #11  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
If you unplug the sensor does the light still come on???

And I'd have to go check what the light is... I generally avoid S5 models and don't remember it off the top of my head.
Reply
Old Oct 3, 2005 | 12:56 AM
  #12  
NZConvertible's Avatar
I'm a boost creep...
Tenured Member 05 Years
 
Joined: Jan 2002
Posts: 15,608
Likes: 8
From: Auckland, New Zealand
Are you absolutely sure that was the light that came on? Because with the ignition turned on all of the bulbs should be lit, and the missing light in the photo is the ANTILOCK warning light. If you don't have ABS, you probably don't even have a bulb in there. Go check if you have ABS and tell us.

My guess would be it was the OIL LEVEL light your friend saw come on. Fast corners with low oil with bring that light on momentarily. Did you hear a buzzer too?
Reply
Old Oct 3, 2005 | 02:54 PM
  #13  
Torch101's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jul 2005
Posts: 148
Likes: 0
From: U.S.
Sorry stupid question but how do I check if I have ABS or not? If I did have ABS shouldn't it be showing on the warning panel as ANTI-LOCK as you mentioned?

No I'm not confident that it said brake...perhaps it said washer fluid level or something else all I know it was in the top right corner.

Well I'm going to go take some wide turns today to be 100%.
Reply
Old Oct 3, 2005 | 04:29 PM
  #14  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
well again, unplug the fluid sensor and confirm
Reply
Old Oct 4, 2005 | 12:54 AM
  #15  
NZConvertible's Avatar
I'm a boost creep...
Tenured Member 05 Years
 
Joined: Jan 2002
Posts: 15,608
Likes: 8
From: Auckland, New Zealand
Originally Posted by Torch101
No I'm not confident that it said brake...perhaps it said washer fluid level or something else all I know it was in the top right corner.
I don't know why I didn't notice the washer light right next door before. I'm sure that's the one it'll be.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
1st Generation Specific (1979-1985)
7
Aug 23, 2015 09:28 AM
fastsaab
New Member RX-7 Technical
5
Aug 19, 2015 11:42 AM




All times are GMT -5. The time now is 05:49 PM.