Boost Presure
04-07-04, 11:40 AM
#1
Junior Member
Thread Starter
Join Date: Feb 2004
Location: Roanoke Rapids, NC
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Boost Presure
I have a 87 TurboII. It has been street ported, bigger injectors (720), 3" down pipe with the racing beat exhaust, intake. no power steering and no ac. with electrioc fan. i am running 8 PSI. what would be a safe pressure i can run with my car??10 or 12
04-07-04, 11:46 AM
#4
Locust of the apocalypse
Join Date: Apr 2003
Location: Directly above the center of the earth (York, PA)
Posts: 2,553
Likes: 0
Received 1 Like
on
1 Post
10 will definately be OK....
If you slap an SAFC and tune the car, i see no problem running 12 but you should prpbably put a better FP in it
at 8 PSI, you car is probably running rich righ now with the 720's anyway....
If you removed the AC heat exchanger, you stock rad should hold up to the HP as well. Make sure your coolant is up to snuff, and its been flushed and all that crap.
If you slap an SAFC and tune the car, i see no problem running 12 but you should prpbably put a better FP in it
at 8 PSI, you car is probably running rich righ now with the 720's anyway....
If you removed the AC heat exchanger, you stock rad should hold up to the HP as well. Make sure your coolant is up to snuff, and its been flushed and all that crap.
Last edited by YearsOfDecay; 04-07-04 at 11:58 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Shainiac
Single Turbo RX-7's
12
07-17-19 02:20 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM