2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Best RPM's to launch from

Thread Tools
 
Search this Thread
 
Old Aug 11, 2002 | 12:06 PM
  #1  
marlaman's Avatar
Thread Starter
Need an E6x
Tenured Member 10 Years
 
Joined: Aug 2001
Posts: 842
Likes: 0
From: Phoenix, AZ
Best RPM's to launch from

Hey i was curious. what would be in anybody's opinion th ebest rpm's to launch from? i don't have a ton of expirence with really launching well with our cars so input would be great.

Oh btw i have a 87 n/a with a blown motor. :-) forget about the motor with your comments though please
Reply
Old Aug 11, 2002 | 12:10 PM
  #2  
Mark'sMazda's Avatar
stop stealing my avatar
Tenured Member 05 Years
 
Joined: Apr 2002
Posts: 825
Likes: 0
From: Canton MI
I tired launching at 3.5k and got a 2.7 60ft time wich is total crap. With an NA you really have to luanch high like 5k or 6k
Reply
Old Aug 11, 2002 | 12:14 PM
  #3  
87GTR's Avatar
Eats, Sleeps, Dreams Rotary
Tenured Member 10 Years
iTrader: (61)
 
Joined: Aug 2001
Posts: 3,103
Likes: 1
From: Nago Okinawa
I lauched my car at 5.5k on slicks and ran 1.7 60f
im going to try a 6.5k next time
Reply
Old Aug 11, 2002 | 01:25 PM
  #4  
RyosukeTakahashi's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Mar 2002
Posts: 426
Likes: 0
From: Canada
Originally posted by Mark'sMazda
I tired launching at 3.5k and got a 2.7 60ft time wich is total crap. With an NA you really have to luanch high like 5k or 6k
5 or 6... damn I don't think I'm gonna be launching that high unless I get new clutch and tranny and new driveshaft cause I don't think my 15yr old stock parts could handle that.
Reply
Old Aug 11, 2002 | 03:41 PM
  #5  
dre_2ooo's Avatar
...
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 171
Likes: 0
From: Twin Cities, MN
4,500 RPMs.
Reply
Old Aug 11, 2002 | 04:11 PM
  #6  
RexSe7en's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Jul 2002
Posts: 53
Likes: 0
From: Beaverton Or.
I I launch about 4k with k and had a 2.3 60 ft. time
Reply
Old Aug 11, 2002 | 04:16 PM
  #7  
vosko's Avatar
Just Call Me Terminator!
Tenured Member 15 Years
iTrader: (4)
 
Joined: Feb 2001
Posts: 7,848
Likes: 0
From: NJ
my TII i had a 1.92 60 FT launching at 7000 rpm on plain old kumho 712's on stock rims
Reply
Old Aug 11, 2002 | 04:19 PM
  #8  
DCmina's Avatar
Rotary Enthusiast
Tenured Member 05 Years
 
Joined: Nov 2001
Posts: 801
Likes: 0
From: Orange County, California
The only time I tried was a 3k RPMs and it worked pretty well.
88 SE
Reply
Old Aug 21, 2002 | 05:07 AM
  #9  
Junior Member
Tenured Member 10 Years
 
Joined: Aug 2002
Posts: 36
Likes: 0
From: Auckland, New Zealand
I launched at 3000-3500RPM on my 86 NA and got a 60FT time of 2.414, what you guys dont mention is whether you have LSD or not??

I am going back to the quarter mile this weekend for the second time to see if I can improve on my first runs.

My rx has no LSD so with that in mind what RPM do think I can launch at with minimum spin??
Reply
Old Aug 21, 2002 | 05:18 AM
  #10  
dolemite85's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Dec 2001
Posts: 98
Likes: 0
From: Scottsdale, AZ
Another question would be are you guys dropping or slipping your clutches.
Reply
Old Aug 21, 2002 | 05:25 AM
  #11  
Junior Member
Tenured Member 10 Years
 
Joined: Aug 2002
Posts: 36
Likes: 0
From: Auckland, New Zealand
My clutch doesn't have much slip so I drop mine
Reply
Old Aug 21, 2002 | 05:28 AM
  #12  
soul assassin's Avatar
GTR eater
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 664
Likes: 0
From: Tucson Arizona
7k maybe 7500 if the track is nice!
Reply
Old Aug 21, 2002 | 05:33 AM
  #13  
Junior Member
Tenured Member 10 Years
 
Joined: Aug 2002
Posts: 36
Likes: 0
From: Auckland, New Zealand
The track I race on only gets prepped for v8 meets, so if i launched at 7000RPM I would get nowhere, plus I am only running 225/45/17 street tyres
Reply
Old Aug 21, 2002 | 05:52 AM
  #14  
Junior Member
Tenured Member 05 Years
 
Joined: Jul 2002
Posts: 43
Likes: 0
From: Sydney Australa
Launching

When I had my old clutch in the car I used to take off at about 4500rpm slipping the clutch to get a good clean start....( Never raced with slicks )

Since having the sprung button clutch in the car I have found that taking off easy the car boggs down and if I rev it up and dump it , it smokes the **** outa the tyres.. I cant win!

Just a note, I have been building my car to run in full street trim. I wont run slicks down the 1/4 for that reson.

So now I am playing with different tyres and spring/ shock setups to see what works best..
Reply
Old Aug 21, 2002 | 10:21 AM
  #15  
Rotorific's Avatar
I dont know a damn thing
Tenured Member 10 Years
iTrader: (1)
 
Joined: May 2001
Posts: 1,703
Likes: 1
From: Evans, Ga
ive launched the highest at 6k but im scared something will break so i go 7k heheh your not racing em if your not breaking em
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dona1326cosprings7
1st Generation Specific (1979-1985)
4
Oct 29, 2015 06:47 AM
LongDuck
1st Generation Specific (1979-1985)
12
Oct 7, 2015 08:12 PM
eplusz
General Rotary Tech Support
15
Oct 7, 2015 04:04 PM
musker
New Member RX-7 Technical
1
Oct 1, 2015 05:58 PM




All times are GMT -5. The time now is 03:39 AM.