Bad fuel injector problem
#27
Dorifto Tengoku No More
Thread Starter
Join Date: Nov 2002
Location: On the mountain of Thessaloniki, Greece
Posts: 1,331
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by HAILERS
Buy new upper and lower grommets for the injectors and new o'rings for the top of the injectors.
Buy new upper and lower grommets for the injectors and new o'rings for the top of the injectors.
I have the FSMs so I can look there.
#28
Lives on the Forum
Grommet = rubber insulator
Mazda calls the top "grommet" that rubber ring with the groove in it that sits right under the rubber o-ring that seals the top to the fuel rail. This prevents the fuel injector from banging up and down into the fuel rail that can cause potential damage to the fuel injector and / or fuel rail.
Mazda calls the bottom "grommet" that squared rubber ring that sits at the tip of the fuel injector. This seals the fuel injector to the intake manifold. These tend to harden and not seal well, causing an intake leak.
-Ted
Mazda calls the top "grommet" that rubber ring with the groove in it that sits right under the rubber o-ring that seals the top to the fuel rail. This prevents the fuel injector from banging up and down into the fuel rail that can cause potential damage to the fuel injector and / or fuel rail.
Mazda calls the bottom "grommet" that squared rubber ring that sits at the tip of the fuel injector. This seals the fuel injector to the intake manifold. These tend to harden and not seal well, causing an intake leak.
-Ted
#29
Dorifto Tengoku No More
Thread Starter
Join Date: Nov 2002
Location: On the mountain of Thessaloniki, Greece
Posts: 1,331
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by RETed
Grommet = rubber insulator
Mazda calls the top "grommet" that rubber ring with the groove in it that sits right under the rubber o-ring that seals the top to the fuel rail. This prevents the fuel injector from banging up and down into the fuel rail that can cause potential damage to the fuel injector and / or fuel rail.
Mazda calls the bottom "grommet" that squared rubber ring that sits at the tip of the fuel injector. This seals the fuel injector to the intake manifold. These tend to harden and not seal well, causing an intake leak.
-Ted
Grommet = rubber insulator
Mazda calls the top "grommet" that rubber ring with the groove in it that sits right under the rubber o-ring that seals the top to the fuel rail. This prevents the fuel injector from banging up and down into the fuel rail that can cause potential damage to the fuel injector and / or fuel rail.
Mazda calls the bottom "grommet" that squared rubber ring that sits at the tip of the fuel injector. This seals the fuel injector to the intake manifold. These tend to harden and not seal well, causing an intake leak.
-Ted
-Fanis
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
1st Generation Specific (1979-1985)
7
08-23-15 09:28 AM