is there anyway to tell if the Aux Valves are working Correctly?

as im having an Odd feeling that they are not

 

put some grease on the auxilary rods, start the car and wait till normal operating temperature then run the car hard doing a few redlines here and there. then take a look at the rods and see if the grease moved at all. if it did then they're working correctly. if not then you might want to look into cleaning up the port valves.

 

they did not move........ whats the drawbacks of it not working correctly?

 

loss of 25 hp above 3800 rpms

 

K then how would i go about freeing this Rod Valve thing up?

 

u have to remove the intake in order to pull the valve from the housing. then u would just clean it off with some degreaser, wire wheel or whatever so it slides in the housing nice and smooth...

also a good time to make sure the actual lever is freed up inside the lim

Dave

 

Can you move them by hand?

 

im waiting for the Car to cool down Befor i reach for it. But she looks Toasty