ATF But Oil use trick
#2
Wish he had a running rx7
Thread Starter
Join Date: Nov 2006
Location: Oklahoma City
Posts: 1,180
Likes: 0
Received 0 Likes
on
0 Posts
someone please send something and yes i have looked it up so there some people said use 2 stroke engine oil but i don't know for sure
#3
RE WannaBE
iTrader: (3)
Join Date: Nov 2006
Location: Chelan,WA
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
you can use 2 stroke oil if you are willing to bypass the omp to a resevoir of 2stroke oil..not atf tho..
it can be used in a mix of oil and atf to clean engine internals due to ATF's high amount of detergents... but that is in the case of piston engines, i dont know about it in a rotary...
heres a link to patman's DIY
https://www.rx7club.com/search.php?searchid=2926507
Dave.
it can be used in a mix of oil and atf to clean engine internals due to ATF's high amount of detergents... but that is in the case of piston engines, i dont know about it in a rotary...
heres a link to patman's DIY
https://www.rx7club.com/search.php?searchid=2926507
Dave.
#6
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 110 Likes
on
93 Posts
What are you trying to accomplish with this "trick"?
If the engine is just flooded, then motor oil/two stroke oil is fine. ATF if you can't find anything else and intend to start and drive the car immediately.
But if you are trying to clean out carbon, then search for the "water trick". Keep in mind that it is possible to do more damage then you "cure" since large chunks of carbon can fall off an jam up...
In my opinion, it is best to just leave it alone.
If the engine is just flooded, then motor oil/two stroke oil is fine. ATF if you can't find anything else and intend to start and drive the car immediately.
But if you are trying to clean out carbon, then search for the "water trick". Keep in mind that it is possible to do more damage then you "cure" since large chunks of carbon can fall off an jam up...
In my opinion, it is best to just leave it alone.
#7
Wish he had a running rx7
Thread Starter
Join Date: Nov 2006
Location: Oklahoma City
Posts: 1,180
Likes: 0
Received 0 Likes
on
0 Posts
Now how much do i need to put in each housing and how many times do i need to do it. One more thing do i need to take the starter out.
Trending Topics
#9
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 110 Likes
on
93 Posts
What are you trying to do?
If the car is flooded, try searching for "unflooding" and checking the FAQ.
If you want to try and clean out any carbon, search for "water trick".
Otherwise you're going to need to give us a little information...
If the car is flooded, try searching for "unflooding" and checking the FAQ.
If you want to try and clean out any carbon, search for "water trick".
Otherwise you're going to need to give us a little information...
Thread
Thread Starter
Forum
Replies
Last Post
troym55
3rd Generation Specific (1993-2002)
23
05-25-16 12:42 PM
tiger18
3rd Generation Specific (1993-2002)
9
09-03-15 08:27 PM