Any turbo manifolds around 500$
11-15-23, 08:59 AM
#1
Full Member
Thread Starter
Any turbo manifolds around 500$
Any 1987 S4 Tii manifolds around the $500 mark. All I am seeing is cheap ones like cx, and expensive custom ones. Im in need of a twin scroll with external wastegate.
11-15-23, 12:17 PM
#2
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,827
Received 2,595 Likes
on
1,843 Posts
i can't think of any new ones, but you might score a used one for $500 (or much less)
the other thing is the HKS FD setup kit, its ~$900, but its the manifold and wastegate 1402-AZ001
the 1402-AZ002 adds the downpipe and oil pipes, for an FD though, so it would need some fab work. and 1402-AZ003 adds the turbo
the other thing is the HKS FD setup kit, its ~$900, but its the manifold and wastegate 1402-AZ001
the 1402-AZ002 adds the downpipe and oil pipes, for an FD though, so it would need some fab work. and 1402-AZ003 adds the turbo
The following users liked this post:
diabolical1 (11-19-23)
11-19-23, 03:43 PM
#4
https://www.google.com/url?sa=t&sour...vXQH3Se37odIpx
These are proven. Mild steel. Reliable. They work. May or may not need a bit of die grinding around the ports depending how fussy you are. Pretty much every turbo/engine/chassis configuration available. Not sure if shipping will work out for you though.
These are proven. Mild steel. Reliable. They work. May or may not need a bit of die grinding around the ports depending how fussy you are. Pretty much every turbo/engine/chassis configuration available. Not sure if shipping will work out for you though.
The following 2 users liked this post by WANKfactor:
diabolical1 (11-19-23),
j9fd3s (11-20-23)
11-22-23, 06:40 PM
#5
what’s wrong with the CXR one? if you can’t afford the bubbly you gotta buy MD 20/20 
there’s a decent dual 40mm EWG shorty fs on fleabay, looks like the fabricated Turblown version
https://www.ebay.com/itm/325887980509
and the mother of all bottom of the budget barrel scrapers seems low cost enough to take a chance on
https://www.rotary-works.com/RW-MF-RX7-FC
honestly though, 321 stainless pipe and elbows are so affordable and available now that it makes no sense for anyone to make a rotary turbo manifold out of 304.
.
there’s a decent dual 40mm EWG shorty fs on fleabay, looks like the fabricated Turblown version
https://www.ebay.com/itm/325887980509
and the mother of all bottom of the budget barrel scrapers seems low cost enough to take a chance on
https://www.rotary-works.com/RW-MF-RX7-FC
honestly though, 321 stainless pipe and elbows are so affordable and available now that it makes no sense for anyone to make a rotary turbo manifold out of 304.
.
Thread
Thread Starter
Forum
Replies
Last Post
DEZERTE
2nd Generation Specific (1986-1992)
3
07-24-04 08:21 AM
FattMarrell
2nd Generation Specific (1986-1992)
11
05-17-04 05:33 PM