Any particular reason why my new transmisson wont go into 3rd Gear???
Thread Starter
Joined: Jan 2002
Posts: 11,093
Likes: 2
From: Hood River oregon
Any particular reason why my new transmisson wont go into 3rd Gear???
Does anyone have a clue as to why my new transmission locks me out of third gear only? All other gears shift like butter and no noises associated in the operation of the transmission. Just looking for ideas here.
I'm no pro and run about 35 seconds flat in the quater mile, but, I've had a problem getting in fourth gear a couple of times and it was caused by the plastic shims under the shifter crumbling and messing things up. Cleaned that shift hole out and got fourth gear again. Ah heck, fifth gear was the gear, not fourth.
Plastic shims may be the wrong wording.
Stuff shown in this FAQ: http://www.mazdatrix.com/faq/shiftbsh.htm
Plastic shims may be the wrong wording.
Stuff shown in this FAQ: http://www.mazdatrix.com/faq/shiftbsh.htm
Mine happened all of a sudden and wouldn't shift into any gear. Pulled off on the side of the road and found those "shims" that HAILERS was talking about were messing up the works down there. Pulled 'em out and was fine.
Thread
Thread Starter
Forum
Replies
Last Post
24seven_dada
3rd Generation Specific (1993-2002)
20
Nov 10, 2018 12:03 PM
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
REX7&Z32TT
New Member RX-7 Technical
5
Sep 9, 2015 05:16 AM



