2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

AFTER REmoving airpump.... slight idling problem...

Thread Tools
 
Search this Thread
 
Old Jul 22, 2002 | 11:10 PM
  #1  
seventhgear's Avatar
Thread Starter
boost on the way(GTU II)
Tenured Member: 20 Years
 
Joined: Dec 2001
Posts: 1,753
Likes: 2
From: tampa,fl.
Question AFTER REmoving airpump.... slight idling problem...

hey guys i think i have seen some posts somewhat like this before but i did a search and found nothing .. well im jus asking how can i fix the jumpy idle from anywhere from 1000rpm's to 2100rpm idle? in gear with the cluth in stopped at a light itll jump from 1500 to 2000 constantly but in neutral itll stay at 2000. i have set the idle up just a tad but if i set it lower it might stall 24/7. jus askin for some tips and anyones .02
thanks
jack
Reply
Old Jul 22, 2002 | 11:25 PM
  #2  
seventhgear's Avatar
Thread Starter
boost on the way(GTU II)
Tenured Member: 20 Years
 
Joined: Dec 2001
Posts: 1,753
Likes: 2
From: tampa,fl.
i still have my a/c and p/s but no a/p please someone throw some info at me .... thanks
jack
Reply
Old Jul 22, 2002 | 11:27 PM
  #3  
kleach18's Avatar
Just Looking Around
Tenured Member 20 Years
 
Joined: Jan 2002
Posts: 1,830
Likes: 0
From: Fort Benning, Ga./ Anna, Tx.
Tps is out of adjustment! Searh for TPS adjustments
try and see if that helps.

Or there is a air hose that comes from the engine block that goes to the air pump. If you removed it make sure you block it with a plate or plug up the hose somehow

kleach
Reply
Old Jul 23, 2002 | 11:35 PM
  #4  
seventhgear's Avatar
Thread Starter
boost on the way(GTU II)
Tenured Member: 20 Years
 
Joined: Dec 2001
Posts: 1,753
Likes: 2
From: tampa,fl.
i know i removed a lot of shizit when i took the air pump out but i only blocked off one hose and i think it connected to that long thin metal pipe that went to the cat if thatz not it can someone pleez tell me where or what it looks like
thanks
jack
Reply
Old Jul 23, 2002 | 11:45 PM
  #5  
seventhgear's Avatar
Thread Starter
boost on the way(GTU II)
Tenured Member: 20 Years
 
Joined: Dec 2001
Posts: 1,753
Likes: 2
From: tampa,fl.
well i do not know if it has n e thing to do with it but i do have an exhaust leak! well n e one out there know what hose he was talkin bout? thanks

jack
Reply
Old Jul 23, 2002 | 11:53 PM
  #6  
Scott 89t2's Avatar
SOLD THE RX-7!
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 7,451
Likes: 0
From: Vancouver, BC, Canada
taking the air pump off won't effect idle... what (how much) did you take off? just the belt, 2 bolts that hold it on, and the pipe from the air pump to intake box? or did you take off more? like the ACV?
Reply
Old Jul 24, 2002 | 08:26 AM
  #7  
seventhgear's Avatar
Thread Starter
boost on the way(GTU II)
Tenured Member: 20 Years
 
Joined: Dec 2001
Posts: 1,753
Likes: 2
From: tampa,fl.
i took off those lil canister looking things too.
Reply
Old Jul 24, 2002 | 04:13 PM
  #8  
seventhgear's Avatar
Thread Starter
boost on the way(GTU II)
Tenured Member: 20 Years
 
Joined: Dec 2001
Posts: 1,753
Likes: 2
From: tampa,fl.
im goin to try and adjust the tps but what if that doesnt work ?
Reply
Old Jul 24, 2002 | 06:20 PM
  #9  
seventhgear's Avatar
Thread Starter
boost on the way(GTU II)
Tenured Member: 20 Years
 
Joined: Dec 2001
Posts: 1,753
Likes: 2
From: tampa,fl.
well i dont have an ohm meter ....ummm what else could i do in the mean time while i dont have an ohm meter??
thanks again ?
jack
Reply
Old Jul 24, 2002 | 09:09 PM
  #10  
Scott 89t2's Avatar
SOLD THE RX-7!
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 7,451
Likes: 0
From: Vancouver, BC, Canada
Originally posted by seventhgear
i took off those lil canister looking things too.
you mean the BAC valve?? you need that.

you should probbaly know what you are doing before you start ripping stuff off....
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
msilvia
3rd Generation Specific (1993-2002)
28
Apr 14, 2016 12:58 PM
incubuseva
2nd Generation Specific (1986-1992)
14
Sep 3, 2015 12:37 PM
R7rexy
3rd Generation Specific (1993-2002)
19
Sep 2, 2015 10:24 AM
CaptainKRM
2nd Generation Specific (1986-1992)
15
Aug 29, 2015 01:33 PM




All times are GMT -5. The time now is 04:44 PM.