2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

92 & 93 rx7?

Thread Tools
 
Search this Thread
 
Old Nov 26, 2018 | 07:34 PM
  #1  
92rx7fd3s's Avatar
Thread Starter
Junior Member
 
Joined: Nov 2018
Posts: 5
Likes: 0
From: chicago
92 & 93 rx7?

what is the difference in the rear quarter panel of a 92 & 93 rx7?
Reply
Old Nov 26, 2018 | 08:24 PM
  #2  
nopistons1994's Avatar
Full Member
Tenured Member 15 Years
iTrader: (1)
 
Joined: Apr 2005
Posts: 119
Likes: 17
From: Monterey, CA
Depends on what generation you're talking about. Technically they made S5's in 92 and also S6 3rd gens in 92. So the answer is, 1)the whole thing is different since they are different cars or 2)nothing is different since they are the same car.
Reply
Old Nov 26, 2018 | 08:44 PM
  #3  
92rx7fd3s's Avatar
Thread Starter
Junior Member
 
Joined: Nov 2018
Posts: 5
Likes: 0
From: chicago
yeah its a 3rd gen 92 efini had a small accident and need to replace the quarter right panel. so im guessing buying the quarter panel for a 93 will be ok
Reply
Old Nov 26, 2018 | 10:45 PM
  #4  
nopistons1994's Avatar
Full Member
Tenured Member 15 Years
iTrader: (1)
 
Joined: Apr 2005
Posts: 119
Likes: 17
From: Monterey, CA
Yep you'll be fine
Reply
Old Nov 26, 2018 | 11:18 PM
  #5  
cr-rex's Avatar
half ass 2 or whole ass 1
Tenured Member 10 Years
iTrader: (114)
 
Joined: Nov 2011
Posts: 3,425
Likes: 489
From: okinawa to tampa
Every 3rd gen is the same shell. There are no differences other than the steering wheel location. Even then, it's just a different firewall. The rest of the chassis is the same. The only difference between a lhd and rhd chassis is the firewall. Everything else is the same. In your case you should stop calling your car a 92 rx7 and start calling it an fd. Here on the forum a 92 rx7 isn't always an fd and like the first response you got, clarification will be required. Just refer to it as an fd and you can get answers faster.
Reply
Old Nov 26, 2018 | 11:54 PM
  #6  
Dak's Avatar
Dak
Information Regurgitator
Tenured Member: 25 Years
Liked
Loved
Community Favorite
 
Joined: Feb 2001
Posts: 1,994
Likes: 208
From: Sparta TN. United States
Originally Posted by cr-rex
In your case you should stop calling your car a 92 rx7 and start calling it an fd. Here on the forum a 92 rx7 isn't always an fd and like the first response you got, clarification will be required. Just refer to it as an fd and you can get answers faster.
Yep. IIRC the only RX7 sold in the U.S. in '92 was the convertible so calling it an FD or 3rd gen would keep down the confusion. Just curious how did you get a '92. Is it a RHD import?

Last edited by Dak; Nov 26, 2018 at 11:59 PM.
Reply
Old Nov 27, 2018 | 01:02 AM
  #7  
7krayziboi's Avatar
endless build
Tenured Member 10 Years
iTrader: (15)
 
Joined: Nov 2013
Posts: 1,140
Likes: 26
From: Canada , Alberta
Just a little FYI ...but their was also more than 900 FD3S made in 1991 for the Japanese Domestic Market (JDM)

FD3S is the first 4 VIN number of Japanese (RHD)
FD is the first 2 VIN numbers of American cars (LHD)

i found it funny when LHD guys called their car; FD3S
but whatever,I understand the JDM mazdarbation.

To come back to the subject, as mention above
you’ll be fine from any quarter panel from 1993 to 2002 those are the “official” numbers for the 3rd Gen Rx-7.

even if in reality ,
the 3rd Gen was made from 1991 to 2003.
Reply
Old Nov 27, 2018 | 02:43 AM
  #8  
92rx7fd3s's Avatar
Thread Starter
Junior Member
 
Joined: Nov 2018
Posts: 5
Likes: 0
From: chicago
yeah its a rhd imported from japan last summer. i don't have it in my position its at a shop getting touched up but i might go today il take pics

Last edited by 92rx7fd3s; Nov 27, 2018 at 02:45 AM.
Reply
Old Nov 27, 2018 | 05:46 AM
  #9  
clokker's Avatar
Cake or Death?
Tenured Member 10 Years
iTrader: (2)
 
Joined: Jan 2007
Posts: 10,249
Likes: 64
From: Mile High
Originally Posted by 92rx7fd3s
yeah its a rhd imported from japan last summer. i don't have it in my position its at a shop getting touched up but i might go today il take pics
Be very careful, light from the camera flash could warp your body panels.
Reply
Old Nov 27, 2018 | 11:33 AM
  #10  
j9fd3s's Avatar
Moderator
Community Builder
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: Mar 2001
Posts: 31,833
Likes: 3,232
From: https://www2.mazda.com/en/100th/
Originally Posted by 7krayziboi
Just a little FYI ...but their was also more than 900 FD3S made in 1991 for the Japanese Domestic Market (JDM)
Production for the US market 1993 model year Rx7's starts 12/28/1991 and ends 6/1992, so there were no 1993 model year Rx7's built in the calendar year of 1993.

the Japanese market cars start 10/1991. it does overlap with the final FC run, which were all Verts, July 1991 to September of 1992
Reply
Old Nov 27, 2018 | 11:49 AM
  #11  
92rx7fd3s's Avatar
Thread Starter
Junior Member
 
Joined: Nov 2018
Posts: 5
Likes: 0
From: chicago
so yeah i found a web site called realmazdaparts.com they got the quarter panel for for around 700 shipped. do you guys know of a better and cheaper website? have any of you guys bought from them?
Reply
Old Nov 27, 2018 | 11:51 AM
  #12  
92rx7fd3s's Avatar
Thread Starter
Junior Member
 
Joined: Nov 2018
Posts: 5
Likes: 0
From: chicago
lmfao and to be fare i kidded out of control in the highway and crashed going around 35-40mph and took it pretty well not to much damage
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
CarbonRXX
Group Buy & Product Dev. FD RX-7
397
Mar 9, 2018 05:50 PM




All times are GMT -5. The time now is 03:58 PM.