West TX RX-7

I've seen 3 gauge mounts for the FD and some generic mounts but does anyone sell a 3 pod for the FC? I'm running the larger Greddy gauges also, not the 2" but I guess I could cut it out a bit to fit. I'm running a single and a double now but the lowest one is hard to see. Maybe I could swapo the positions of the mounts but it still doesn't look as clean as one 3 gauge mount would.

hondahater

iTrader: (2)

good question my friend.

Wanked_FC

iTrader: (1)

I've asked this question b4 along with others Im sure. The reponse I've always gotten is the setup you're currently running. To my knowledge no one makes a 60mm pillar pod for the fc, or a genuine triple pillar.

13bpower

I could never find one. I ended up getting a double A-pillar and a triple above the CD deck.

Chuckles

Found this the other night- Check it out.

http://cgi.ebay.com/ebaymotors/ws/eB...e=STRK:MEWA:IT

deevious

I've bought a universal three gauge mount recently, but decided against fitting it as the bottom one is always going to be way too close to the steering wheel.
Instead I'm making a flat panel to replace the glovebox lid. The gauge pod will be mounted on top of that.

hondahater

iTrader: (2)

yeah I've been seeing that for about a month but not sure what year it goes to and I'm kinda to lazy to email the dude.

Chuckles

I emailed him and asked. Let you know.........ck

hondahater

iTrader: (2)

thanks.

91mazdarx7

i asked this question in the audio interior section but never got a answer i was looking for one to but didnt find one i saw that same one on ebay the last couple times i looked for pods i think im going to just get a dual pod and the 3 on top of the radio

West TX RX-7

Cool thanks, let us knoiw what he says.

inflatablepets

I wonder... That's a Honda in the picture. I guess he has some universal thing or somthing.

FC3Sgte

you know if you can get 30 people to pre-pay for a custom 3 gauge full pillar replacement pod, lotek can custom make them for us. http://www.gaugepods.com/custom.html

i had a lotek full pillar replacement gauge pod on my MR2 and the fit and quality was top notch. it is strange though that they have gauge pods for the fb and fd but not the fc...weird

devdog1one

I would be in for a group buy for a 3 guage pod

Thanx

Michael

91mazdarx7

me to but would they fit on automatic seatbelts what materials can they all make them out of

]v[akaveli

i'm in on a possible group buy , p.s. i don't have automatic seatbelts. you guys should state if you have auto seat belts to , if there's enough of you guys they might make them for the auto and non auto seatbelts.

FC3Sgte

someone (a representative from the forum) should contact lotek to see if they will make them. but if you guys wanted auto and non auto pillars...you'd probably need 30 each since they will be made from two different molds.

ddub

Someone already tried a group buy like 6 months or a year ago from Lotek. It failed miserably, lots of "yah I'll take one" and no money being put up or action. It died off pretty quickly.

For the record, you could do it ghettoly like a lot of people do and just mount a single guage pope at the bottom and then a double pod in front of that. If you do it well and close together it's not noticeable.