hiroichi1515

iTrader: (17)

Hey guys, this is gonna be my 2nd attempt at turbocharging my 6 port engine. Thanks to everyone for the help on my 1st one. On that one i used the stock Turbo II parts and injectors, for the ems greddy emanage blue was used. Sadly I didnt get a chance to driving the car, due to the engine blowing in my driveway while I was waiting for a TII throttle cable . Long story short I got mad and sold the car lol.

Anyway, no I have another car and I am starting from scratch and getting a fresh engine built. My ideas are as follows. I want to use s4 6 port motor. I plan to use a the turbo II intake sleeves along with the tII intake manifold. That should take care of any restrictions. I plan on using the front cover as an oil return, i'm not sure of the feed at the moment. I'm also trying to decide on which ems I should use.

If you guys have any ideas or suggestions please let me know.

Thanks,

dawicka2

Go to pocketlogger.com and see if the rtek 2.1 will suffice....with an n333 ecu.


john ny

killahrx7

use an ecu that you or someone near can tune

sen2two

iTrader: (10)

definitly what he said above me...

go to the nearest rotary tuner around you and ask what ECU they prefer to tune.

hiroichi1515

iTrader: (17)

thanks, I think im gonna go with the Haltech E8. Any opinions or anyone have any feedback from experience?

hiroichi1515

iTrader: (17)

So, when you install haltech do you keep your same ecu in the car also. I read a page on installing it, but it didn't mention nothing about removing the ecu.

sen2two

iTrader: (10)

not trying to sound like a dick. but if your question is weather you keep the stock ECU when installing a stand alone. you should not be installing one. it can be pretty complicated. and a wrong wire could destroy the haltech pretty easily.

you remove the stock ECU and a lot of the wiring. cutting and splicing the stock harness or making a new one from scratch. not for the timid...

hiroichi1515

iTrader: (17)

haha thanks, that is pretty much the answer I was looking for. Im not installing it myself but I wanted to know before hand. I'm def not timid when it comes to these machines haha, but I understand your concern.

NI_Racing

iTrader: (4)

Hey fellas, not trying to hijack this thread but im looking for the actuall 6 port turbo write up? I havent been able to find it, can someone pm me the thread? Thanks and sorry for interupting.

RandomHero

iTrader: (2)

AaronCake has a website dedicated to his first 6 port turbo build ( project Tina ). Do a search on here and google and you should be able to find it.