280zx wheel Question
#1
Junior Member
Thread Starter
280zx wheel Question
Hello! I looked around and couldnt find an answer so I figured I would go ahead and post,
Does anyone happen to know if the 6 spoke 280zx wheels will fit and NA 4 lug base 1987 rx7?
I know their bolt patterns are the same but I couldnt find the stock offset of the 280 wheels, I looked and saw answers ranging from 0 to +15mm,
if this is true would a 14x6 with a zero offset work?
Does anyone happen to know if the 6 spoke 280zx wheels will fit and NA 4 lug base 1987 rx7?
I know their bolt patterns are the same but I couldnt find the stock offset of the 280 wheels, I looked and saw answers ranging from 0 to +15mm,
if this is true would a 14x6 with a zero offset work?
#5
Red Pill Dealer
iTrader: (10)
The hub register is important. I wouldn't run a wheel that didn't fit the hub locator correctly. Conversely, the hub locator in the wheel could be too small and won't work at all. If you know a machinist they can fix that.
#6
Junior Member
Thread Starter
Thank you guys for the feedback, the hub is 73mm so it may need rings but will fit on its own, my only concern is the 0 offset, I dont want the wheels to stick out to far, or even worse, rub against the fender. Im just really curious if a 0 offset will work with a 14x6 wheel? I would test fit the wheel but the only problem is Im still building my rx7 in a workshop about 20 miles from my house, and I dont really know the guy well enough to borrow the wheel for the day, but I may just ask anyway to see if it fits. Thanks again guys for the input!
Last edited by KoriFay; 08-30-18 at 05:26 PM. Reason: typo
Trending Topics
The following users liked this post:
KoriFay (08-30-18)
#9
Junior Member
Thread Starter
I do like seeing people setup with larger wheels, I just want something lightweight and durable though, and these 280zx wheels clock in at 12.8 lbs.and I like that theyre an old 80s wheel for my old *** car
Thread
Thread Starter
Forum
Replies
Last Post