1000cc injectors in secs
#1
Rotary Enthusiast
Thread Starter
iTrader: (1)
Join Date: Jul 2003
Location: milpitas, CA
Posts: 1,133
Likes: 0
Received 0 Likes
on
0 Posts
1000cc injectors in secs
http://www.istoreparts.com/product_...roducts_id=8292 will these fit into the sec fuel rail?
http://www.importparts.com/shop/pro...roducts_id=4466 how about these??? wats ball and seat? are these peak and hold as well?
eric
http://www.importparts.com/shop/pro...roducts_id=4466 how about these??? wats ball and seat? are these peak and hold as well?
eric
#6
Rotary Enthusiast
Thread Starter
iTrader: (1)
Join Date: Jul 2003
Location: milpitas, CA
Posts: 1,133
Likes: 0
Received 0 Likes
on
0 Posts
http://www.injector.com/fuelinjectors.php
from the website do i get the 1000cc injectors with the american o ring style or the japanese one? it said the jap one will fit into second gen sevens but i looked up in the forsale section people were selling the american one.
eric
from the website do i get the 1000cc injectors with the american o ring style or the japanese one? it said the jap one will fit into second gen sevens but i looked up in the forsale section people were selling the american one.
eric
#7
just dont care.
iTrader: (6)
yeah just about all asian cars have this style injector:
with 90% of aftermarket injectors, if you're going to use your stock secondary rail, you have to cut a small plastic piece off the injector to get it to fit correctly because the stock rail likes to sit down a little farther on the injector (feed side), or get a fuel rail like the one from rx7store like i have that accepts the bigger oring (the stock one is a little smaller) just a little FYI
with 90% of aftermarket injectors, if you're going to use your stock secondary rail, you have to cut a small plastic piece off the injector to get it to fit correctly because the stock rail likes to sit down a little farther on the injector (feed side), or get a fuel rail like the one from rx7store like i have that accepts the bigger oring (the stock one is a little smaller) just a little FYI
Last edited by jacobcartmill; 08-10-05 at 02:30 AM.
Trending Topics
#10
Rotary Enthusiast
Thread Starter
iTrader: (1)
Join Date: Jul 2003
Location: milpitas, CA
Posts: 1,133
Likes: 0
Received 0 Likes
on
0 Posts
is it neccessary to have the k2rd fuel rail for the 1000cc as secondaries, becuase the inner diameter is bigger thus having less pulsation? or is that only neccessary for 1600cc?
eric.
eric.
#14
Rotary Enthusiast
Thread Starter
iTrader: (1)
Join Date: Jul 2003
Location: milpitas, CA
Posts: 1,133
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by kd86rx7
is it neccessary to have the k2rd fuel rail for the 1000cc as secondaries, becuase the inner diameter is bigger thus having less pulsation? or is that only neccessary for 1600cc?
eric.
eric.
#20
Dorifto Tengoku No More
Join Date: Nov 2002
Location: On the mountain of Thessaloniki, Greece
Posts: 1,331
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jacobcartmill
i'm on heroine (pimpin the ho's baaaotch) not the drug
Your funny Jacob. Everything o.k. in your life?
-Fanis
Thread
Thread Starter
Forum
Replies
Last Post
Adaptronic 1280s Hot Start 3 Rotor 20b RX7
Monsterbox
Adaptronic Engine Mgmt - AUS
5
09-11-15 03:29 PM