just looking for comments good or bad?
#1
Full Member
Thread Starter
Join Date: Jan 2006
Location: auckland
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
just looking for comments good or bad?
here's some pics of my fc..
mods include:
1989 s4 GTX body
13b s5 rebuilt and bridge ported
manaul steering rack, wind up windows and no wiper and washer rear hatch.
gt3540r turbo
2x 1000cc hks injectors
4x 550cc injectors, two with custom fuel rail over manifold
turbo smart pro fuel reg
standard fuel pump filling a 4L surge tank
boosh 044 fuel pump
custom alloy radiator with 16inch fan
turbo smart 50mm wastegate
3inch exhaust with 2 mufflers then spliting with twin 2 1/2 inch dump mufflers
greddy bov
hidden front mount intercooler
3inch intercooler piping
Wheels;
Work Meisters
18x10 rear
18x9 front
both streched with 225/40 18's
Pic's
mods include:
1989 s4 GTX body
13b s5 rebuilt and bridge ported
manaul steering rack, wind up windows and no wiper and washer rear hatch.
gt3540r turbo
2x 1000cc hks injectors
4x 550cc injectors, two with custom fuel rail over manifold
turbo smart pro fuel reg
standard fuel pump filling a 4L surge tank
boosh 044 fuel pump
custom alloy radiator with 16inch fan
turbo smart 50mm wastegate
3inch exhaust with 2 mufflers then spliting with twin 2 1/2 inch dump mufflers
greddy bov
hidden front mount intercooler
3inch intercooler piping
Wheels;
Work Meisters
18x10 rear
18x9 front
both streched with 225/40 18's
Pic's
#3
Full Member
Thread Starter
Join Date: Jan 2006
Location: auckland
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
cheers.. its still in the build.. but just little touches here and there are needed..
has not been dynod yet.. only had a base tune.. with the mirco tech.
i will try and get some videos asap..
has not been dynod yet.. only had a base tune.. with the mirco tech.
i will try and get some videos asap..
#6
i dunno, i assume you put a pipe in between in order to clamp it like that but just keep an eye out for leaks.
If you couldn't find a hose/pipe to fit then that you did was the best option.
If you couldn't find a hose/pipe to fit then that you did was the best option.
#7
Full Member
Thread Starter
Join Date: Jan 2006
Location: auckland
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
tomorrow i will be buying a adpator for a thermo fan switch so soon you will be able too see where the two pipes join.. but i was also thinking of choping a bit off the end where it connects too the thermostate housing.. unsure yet.
Trending Topics
#10
Full Member
Thread Starter
Join Date: Jan 2006
Location: auckland
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
#12
Full Member
Thread Starter
Join Date: Jan 2006
Location: auckland
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
#15
Full Member
Thread Starter
Join Date: Jan 2006
Location: auckland
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
just running a single off the turbo into one bullet packed muffler then splits off into two 2 1/2 inch's over the diff with twin x force dumpy's at the end