hey guys well im in a dilemma right now car is almost ready to hit the street after three years of building.. the turbo i went with was a stage three bnr and when i was getting it tuned i only received 220hp to the wheel and 220 foot torque . wtf is that ? i was looking for 300 350 to the wheel. i built and did everything right im boosting 12psi... using T03 with all new bearings. were can i go to get a better kit thats going to give me what i want. thanks guy s

 

i thought those bnr's were good for low 300's? what ecu are u running? injectors? from experience, ud be best off building ur own "kit" if you do enough research and save money in the process. i went with a himni racing kit. beautifully put together, and they can tailor to any of ur needs as well.

 

depends on what dyno you were tuned on, internet dyno numbers are like comparing apples to oranges.

 

up the psi.

 

A BNR stage 3 yielded you only 220hp? What type of dyno, and what fuel / engine mods are you running?

 

ecu power fc by apexi 550 and 720sec

 

big street port 3 in racing beat turbo back front mount intercooler, power fc stage 3 bnr, 220 fuel pump \ 91 octane gas im using

 

something is wrong with your setup then.

even the stock turbo will push more than that powerwise at that boost level. so upgrading to another turbo is pissing money away for nothing.

check your timing and be sure both leading and trailing coil packs are working.

 

+1.