FC guys... What other non FC projects do you have?
#3
Slowpoke
iTrader: (3)
my blazer 2wd
I am wanting to sell it though, got a fuel pump on the way that I need to install.. I want to pick up a first gen 80s toyota 4x4 or 4runner. Im not too much of a fan of domestic vehicles or the problems they bring.
something like this
but I dont expect to get one built like that, I just like them and want to try wheeling. Than im gonna run it on HHO hybrid http://www.hhoforums.com/showthread....6453#post46453
Having low cars all my life, I have taken an interest in trucks hahaha, Probably get some bucket 4runner on craigslist and hopefully have a few bucks leftover to clean it up.
Hoping to start work soon as a field service technician, Was hired like 3 months ago but haven't started. Looking to pay off my student loan and have a good dailly driver while I rebuild my fc. Been too broke to finish it.
I do claim myself as a car guy though, appreciate all forms of cars. My dad loves nascar, I don't mind it. I am a big formula 1 fan though. I love exotic super cars.. I would love to build a porsche 911 70s chassis someday, or even a 308 GTB to GTO body conversion, this one is pretty sweet http://members.home.nl/bertkanters/ , I don't mind kitcars either, I would love to build a Factory Five MKIV cobra replica.
I am wanting to sell it though, got a fuel pump on the way that I need to install.. I want to pick up a first gen 80s toyota 4x4 or 4runner. Im not too much of a fan of domestic vehicles or the problems they bring.
something like this
but I dont expect to get one built like that, I just like them and want to try wheeling. Than im gonna run it on HHO hybrid http://www.hhoforums.com/showthread....6453#post46453
Having low cars all my life, I have taken an interest in trucks hahaha, Probably get some bucket 4runner on craigslist and hopefully have a few bucks leftover to clean it up.
Hoping to start work soon as a field service technician, Was hired like 3 months ago but haven't started. Looking to pay off my student loan and have a good dailly driver while I rebuild my fc. Been too broke to finish it.
I do claim myself as a car guy though, appreciate all forms of cars. My dad loves nascar, I don't mind it. I am a big formula 1 fan though. I love exotic super cars.. I would love to build a porsche 911 70s chassis someday, or even a 308 GTB to GTO body conversion, this one is pretty sweet http://members.home.nl/bertkanters/ , I don't mind kitcars either, I would love to build a Factory Five MKIV cobra replica.
#4
On the fasttrack!
iTrader: (22)
how about: a 1972 datsun 240Z, going with an rb26det, t56 trans, full widebody, cage, long expensive project----very old picture, only one i can find right now
a 1970 vw bug, 52k original miles, a little bit done to the engine, just for reliability
a 2005 f150 lariat, full sound system, and just fathers DD
and my tattoos.......nothing else besides that
Lloyd
a 1970 vw bug, 52k original miles, a little bit done to the engine, just for reliability
a 2005 f150 lariat, full sound system, and just fathers DD
and my tattoos.......nothing else besides that
Lloyd
Trending Topics
#8
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,901
Received 2,644 Likes
on
1,873 Posts
1958 Tr-3
i'd put the attachment as an IMG, but its huge this time, last time i posted it, it wasn't so big!
i'd put the attachment as an IMG, but its huge this time, last time i posted it, it wasn't so big!
#9
.................
iTrader: (9)
93 toyota 4X4 with a 4" bds suspension lift, 2" bodylift, 33" M/T's and a built NA Ford 302...this is a work in progress.
01 jeep cherokee "XJ" 4.5" rough country suspension lift, 32" M/T's, JCR pre-runner front bumper, JCR stage 2 rear bumper.
selling my FC to put money into my house, and build something else.
01 jeep cherokee "XJ" 4.5" rough country suspension lift, 32" M/T's, JCR pre-runner front bumper, JCR stage 2 rear bumper.
selling my FC to put money into my house, and build something else.
#11
Rotary Enthusiast
https://www.rx7club.com/2nd-generation-non-technical-pictures-198/cousin-rx7-971751/ Project "LUCE UNIT" just bought the ole' girl Lucy off an old man. After various problems (Leaks ie: the stupid mazda tee coolant pipe that always claggs out. spark plugs and a horrible lifter tick which i fixed. Runs smoooooth now) a couple more, I will lower it and put the wheels off my FC on it for now. And maybe save for a trusy ROTANG CONVERSION.
#14
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 109 Likes
on
92 Posts
Loads of other stuff. You can't keep me away from building something for very long.
Currently I'm restoring my '76 Cosmo:
https://www.rx7club.com/forum/showthread.php?t=923443
I do all kinds of weird little projects.
For example, last winter I made a little air compressor for blowing out electronics.
http://www.aaroncake.net/projects/12vminicompressor.htm
This spring I upgraded my C & H compressor with a 2 cylinder 14 CFM pump and 5HP motor:
http://www.aaroncake.net/projects/ch...sorupgrade.htm
Made a bicycle cart last summer.
http://www.aaroncake.net/projects/bikecart.htm
In the summer of 2009 I built an aluminum 48V ~1000W electric scooter:
http://www.aaroncake.net/projects/48vscooter.htm
It's an aluminum tube frame skinned with 1/16" panels. The batteries are under the deck, the controller and motor are mounted just in front of the rear wheel.
Late winter/early spring of 2009 I made a digital clock out of copper plate for my shop, sort of a half Steampunk half old exit sign design.
http://www.aaroncake.net/projects/copperclock.htm
Here's an aluminum TIG welding cart I made several years ago for my EconoTIG:
http://www.aaroncake.net/projects/alweldingcart.htm
In 2004, an damaged eccentric shaft and associated stationary gears became a lamp:
http://www.aaroncake.net/projects/eshaftlamp.htm
Currently I'm restoring my '76 Cosmo:
https://www.rx7club.com/forum/showthread.php?t=923443
I do all kinds of weird little projects.
For example, last winter I made a little air compressor for blowing out electronics.
http://www.aaroncake.net/projects/12vminicompressor.htm
This spring I upgraded my C & H compressor with a 2 cylinder 14 CFM pump and 5HP motor:
http://www.aaroncake.net/projects/ch...sorupgrade.htm
Made a bicycle cart last summer.
http://www.aaroncake.net/projects/bikecart.htm
In the summer of 2009 I built an aluminum 48V ~1000W electric scooter:
http://www.aaroncake.net/projects/48vscooter.htm
It's an aluminum tube frame skinned with 1/16" panels. The batteries are under the deck, the controller and motor are mounted just in front of the rear wheel.
Late winter/early spring of 2009 I made a digital clock out of copper plate for my shop, sort of a half Steampunk half old exit sign design.
http://www.aaroncake.net/projects/copperclock.htm
Here's an aluminum TIG welding cart I made several years ago for my EconoTIG:
http://www.aaroncake.net/projects/alweldingcart.htm
In 2004, an damaged eccentric shaft and associated stationary gears became a lamp:
http://www.aaroncake.net/projects/eshaftlamp.htm
#17
Full Member
iTrader: (4)
2001 Banshee, basically took a stock bike, and dumped around 8K into it for 1/8th mile drag. Best i got out of it is 7.64 @ 87mph, 1.6 60ft. Around 95+hp.
1975 Bronco, Old high school project, nearly stock when i got it. 5.5" lift, 4.56 gears, Dlockers, 12K warn winch, 12point roll cage, 3speed, stock 302 w/ MSD billet dizzy, 6AL w/ 2 step limiter, weiand intake, holley 4bbl, 37x12.50 Iroks swampers. Rolled it and put all new sheet metal on the front, about $2500 worth .
1975 Bronco, Old high school project, nearly stock when i got it. 5.5" lift, 4.56 gears, Dlockers, 12K warn winch, 12point roll cage, 3speed, stock 302 w/ MSD billet dizzy, 6AL w/ 2 step limiter, weiand intake, holley 4bbl, 37x12.50 Iroks swampers. Rolled it and put all new sheet metal on the front, about $2500 worth .
#21
Rotary Enthusiast
My project at the moment is polishing my pistol. It was originally blues, but is now mostly polished to a mirror finish. Let me tell you, it's a pain in the *** to get all the small spots shining.