FC guys... What other non FC projects do you have?
 

Seems like a good majority of car enthusiasts have more than one project going on. So got something else that you're working on? Car, truck, boat, bike, whatever, post up details and pics!:icon_tup:

truck ive been puttin most my money into lol.3 inch body lift and 35s. getting 6 inch suspension lift,new box front clip and cab corners:P

http://i2.photobucket.com/albums/y38...U/P1030203.jpg

my blazer 2wd
http://i54.tinypic.com/2lxxmch.jpg
I am wanting to sell it though, got a fuel pump on the way that I need to install.. I want to pick up a first gen 80s toyota 4x4 or 4runner. Im not too much of a fan of domestic vehicles or the problems they bring.

something like this
http://img.photobucket.com/albums/v5...9/DSC03338.jpg
but I dont expect to get one built like that, I just like them and want to try wheeling. Than im gonna run it on HHO hybrid http://www.hhoforums.com/showthread....6453#post46453

Having low cars all my life, I have taken an interest in trucks hahaha, Probably get some bucket 4runner on craigslist and hopefully have a few bucks leftover to clean it up.

Hoping to start work soon as a field service technician, Was hired like 3 months ago but haven't started. Looking to pay off my student loan and have a good dailly driver while I rebuild my fc. Been too broke to finish it.

I do claim myself as a car guy though, appreciate all forms of cars. My dad loves nascar, I don't mind it. I am a big formula 1 fan though. I love exotic super cars.. I would love to build a porsche 911 70s chassis someday, or even a 308 GTB to GTO body conversion, this one is pretty sweet http://members.home.nl/bertkanters/ , I don't mind kitcars either, I would love to build a Factory Five MKIV cobra replica.

how about: a 1972 datsun 240Z, going with an rb26det, t56 trans, full widebody, cage, long expensive project----very old picture, only one i can find right now http://i241.photobucket.com/albums/f...2/P1010122.jpg

a 1970 vw bug, 52k original miles, a little bit done to the engine, just for reliability
http://i241.photobucket.com/albums/f...2/IMG00011.jpg
https://fbcdn-sphotos-a.akamaihd.net..._4935036_n.jpg

a 2005 f150 lariat, full sound system, and just fathers DD
http://i241.photobucket.com/albums/f...2/DSCN0760.jpg

and my tattoos.......nothing else besides that
https://fbcdn-sphotos-a.akamaihd.net...13867122_n.jpg
https://fbcdn-sphotos-a.akamaihd.net..._4438198_n.jpg
https://fbcdn-sphotos-a.akamaihd.net..._3175631_n.jpg

Lloyd

im working on this68 rt52 corona coupe :nod:

http://img705.imageshack.us/img705/5337/newpics060.jpg

Wait... there are cars out there other than my FC? :scratch:

I guess my other "project" is my SRT-4, though just fixing the little things that were flawed with it when I bought it (nothing mechanical, it's been a dream so far). It's about 340WHP now.

http://i90.photobucket.com/albums/k2...3/SAM_0180.jpg

2006 harley sportster that ive been tryin gto get back ont he road since last year. i got hit by a maxima. the picture id before the crash looks the same now after a year and a lot of money. almost done.http://i24.photobucket.com/albums/c4...a/100_0252.jpg

1958 Tr-3

i'd put the attachment as an IMG, but its huge this time, last time i posted it, it wasn't so big!

93 toyota 4X4 with a 4" bds suspension lift, 2" bodylift, 33" M/T's and a built NA Ford 302...this is a work in progress.

01 jeep cherokee "XJ" 4.5" rough country suspension lift, 32" M/T's, JCR pre-runner front bumper, JCR stage 2 rear bumper.

selling my FC to put money into my house, and build something else.

I have a 97 Cherokee that is part DD part long term project. So far Its got a 3 inch BDS lift and 31 inch BFG A/Ts.

https://www.rx7club.com/2nd-generation-non-technical-pictures-198/cousin-rx7-971751/ Project "LUCE UNIT" just bought the ole' girl Lucy off an old man. After various problems (Leaks ie: the stupid mazda tee coolant pipe that always claggs out. spark plugs and a horrible lifter tick which i fixed. Runs smoooooth now) a couple more, I will lower it and put the wheels off my FC on it for now. And maybe save for a trusy ROTANG CONVERSION.

probably pillage a few more parts out the fc while its not going.

Done with my 02 ZX6R. I might be selling it and saving to buy a ten next year. Then the addiction will start all over again... after I finish my rx7 of course. :)

http://i879.photobucket.com/albums/a...6/IMG_0034.jpg

Loads of other stuff. You can't keep me away from building something for very long. :)

Currently I'm restoring my '76 Cosmo:
https://www.rx7club.com/forum/showthread.php?t=923443

I do all kinds of weird little projects.

For example, last winter I made a little air compressor for blowing out electronics.

http://www.aaroncake.net/projects/12vminicompressor.htm

http://www.aaroncake.net/projects/12...ompressor1.jpg

This spring I upgraded my C & H compressor with a 2 cylinder 14 CFM pump and 5HP motor:

http://www.aaroncake.net/projects/ch...sorupgrade.htm

http://www.aaroncake.net/projects/ch...rade_title.jpg

Made a bicycle cart last summer.

http://www.aaroncake.net/projects/bikecart.htm

http://www.aaroncake.net/projects/bikecart11.jpg

In the summer of 2009 I built an aluminum 48V ~1000W electric scooter:

http://www.aaroncake.net/projects/48vscooter.htm

http://www.aaroncake.net/projects/48vscooter32.jpg

It's an aluminum tube frame skinned with 1/16" panels. The batteries are under the deck, the controller and motor are mounted just in front of the rear wheel.

http://www.aaroncake.net/projects/48vscooter29.jpg

Late winter/early spring of 2009 I made a digital clock out of copper plate for my shop, sort of a half Steampunk half old exit sign design.

http://www.aaroncake.net/projects/copperclock.htm

http://www.aaroncake.net/projects/copperclock_small.jpg

Here's an aluminum TIG welding cart I made several years ago for my EconoTIG:

http://www.aaroncake.net/projects/alweldingcart.htm

http://www.aaroncake.net/projects/alweldingcart13.jpg

In 2004, an damaged eccentric shaft and associated stationary gears became a lamp:

http://www.aaroncake.net/projects/eshaftlamp.htm

http://www.aaroncake.net/projects/eshaftlamp1.jpg

cool shit aaron

That lamp is bad ass. I bet there'd be a market for those on here.

2001 Banshee, basically took a stock bike, and dumped around 8K into it for 1/8th mile drag. Best i got out of it is 7.64 @ 87mph, 1.6 60ft. Around 95+hp.

http://i142.photobucket.com/albums/r...h/PIC_0191.jpg
http://i142.photobucket.com/albums/r...h/PIC_0193.jpg
http://i142.photobucket.com/albums/r...h/PIC_0190.jpg
http://i142.photobucket.com/albums/r...h/IMGP0238.jpg

1975 Bronco, Old high school project, nearly stock when i got it. 5.5" lift, 4.56 gears, Dlockers, 12K warn winch, 12point roll cage, 3speed, stock 302 w/ MSD billet dizzy, 6AL w/ 2 step limiter, weiand intake, holley 4bbl, 37x12.50 Iroks swampers. Rolled it and put all new sheet metal on the front, about $2500 worth :facepalm4:.


http://i142.photobucket.com/albums/r...r/SSPX0164.jpg
http://i142.photobucket.com/albums/r...h/SSPX0242.jpg
http://i142.photobucket.com/albums/r...n/SSPX0291.jpg
http://i142.photobucket.com/albums/r...n/SSPX0307.jpg
http://i142.photobucket.com/albums/r...k/IMGP0077.jpg

my 2011 ruckus planing on eventually doing a GY6, stretching, fat tire kit, and many more mods
http://i998.photobucket.com/albums/a...a/48b1cd14.jpg

and my 98 GSXR that i bought an 02 750cc engine for
http://i998.photobucket.com/albums/a...a/9663588c.jpg

I think shipping would be an issue...it weighs about 120LBs. The base is solid steel.

Old Bronco FTW! I don't like trucks/suv's/large vehicles but I would totally rock a Bronco. :)

Just working on brakes (for now)
Been tracking during the past 2 summers. The bug has bitten.
http://img.photobucket.com/albums/v6...P_IN1_2258.jpg

Excellent point! Haha



My project at the moment is polishing my pistol. It was originally blues, but is now mostly polished to a mirror finish. Let me tell you, it's a pain in the ass to get all the small spots shining.

this is mine.

https://s-hphotos-sea1.fbcdn.net/hph..._3618793_n.jpg

35mph lawnmower and the "mower chariot" to tow a passenger. recently spun a bearing

YZ426F
http://a1.sphotos.ak.fbcdn.net/hphot..._2369390_n.jpg
Yamaha Vmax700
http://a8.sphotos.ak.fbcdn.net/photo...37_2774190.jpg

No pics :( 84 yota 4x4, lifted yada yada. And a kt100 kart.