K!NCH

iTrader: (2)

Post the BOV on your FC. Picture of the setup, and a sound clip or video would be appreciated.

RotaryWeaponSE7EN

iTrader: (6)

Blitz BOV, clean and loud at full boost.

K!NCH

iTrader: (2)

Video please!

manuelxj

iTrader: (2)

im runing the tial 50mm bov i dont have a vid but lets just say its damn loud ..



got it cuz im gona be going with a biger turbo here very soon and also i got a hell of a deal on it..as soon as i get some time off work in gona get the front mount set up on the car i jsut need a day to build all the piping

K!NCH

iTrader: (2)

Damn that huge! And good luck on your build.

Turbo II Rotor

iTrader: (2)

No BOV.

K!NCH

iTrader: (2)

Quick question, do you think a BOV is needed for a stock TII turbo? Which will be upgraded eventually.

MidnightOwl

It's not necessary for the stock set up. The stock bov works just fine, but an aftermarket one makes a cool noise. I just have one to make my car obnoxious.

manuelxj

iTrader: (2)

thats kinda the reason i got the tial but it was also cuz im gona be steping up to a bigger turbo here soon..

K!NCH

iTrader: (2)

That's sorta why I wanna get one

But I plan on doing the swap then adding that and slowly upgrading pieces like FMIC, injectors and everything then a bigger turbo and I'd already have the BOV.

sharingan 19

iTrader: (16)

The stock BOV is actually audible inside the cabin (don't know about outside the car) once you get a decent exhaust and intake. If it wasn't recirculating it would probably be even louder.

While its cool to hear some kind of sound, my friends and I make fun of skittles WAY too much for me to ever become anything like them.

Groshuk

You can just disconnect the outlet on the stock BOV and plug the hole in the intake if all you want is more noise can't you?

vato2000taco

iTrader: (1)

no , it will suck air in ,aka backfeed so you need a checkvalve

WingsofWar

TurboXS Type S

K!NCH

iTrader: (2)

Nice setup. Very clean.

K!NCH

iTrader: (2)

Maybe this thread is pointless, but I had figured that different BOVs sounded different. Pictures are great and all, but I'd like to hear them unless they're all the same...

Eple

They do, however it's also relative to how many PSI you're running.



manuelxj - Are you running stock boost, or more?

Jross427

iTrader: (13)

http://videos.streetfire.net/video/A...nto_139109.htm
i love this one haha, unkown to me though

K!NCH

iTrader: (2)

That was pretty sweet, I'm looking for something a little more high pitched.

manuelxj

iTrader: (2)

im runing 12psi right now (i have upgraded the fuel system as well as the ecu im runing megasquirt for the fuel and spark)
gona be steping up to a new borgwarner turbo here soon

manuelxj

iTrader: (2)

that one almost sounds like my tial 50 mm bov ita just not as loud lol

g14novak

iTrader: (1)

Sounds like a AGP for HKS SS BOV. Can't really tell because he isn't running much boost.

K!NCH

iTrader: (2)

Anybody have the Greddy Type R? Or RS, or whatever it's called.

gxl90rx7

iTrader: (1)

i have the greddy type s, i like it.. more of a long psssshhhh sound, instead of the short squeak some bovs make

Turbo II Rotor

iTrader: (2)

I like the sound of compressor surge better.