EGI Comp Fuse
#1
Junior Member
Thread Starter
Join Date: Nov 2020
Location: Norfolk, Virginia
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
EGI Comp Fuse
Hey guys! My car was driving and then the motor just shut off. I noticed i keep blowing my EGI comp fuse. Any idea what it could be?
#3
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
The EGI fuse is essentially the entire fuel injection system so unfortunately that means a lot of possible causes. Start with the easy stuff first though. Any wires pinched or rubbing around the intake manifold area? That harness leads out the passenger side (assuming left hand drive) and over the exhaust area. Melted? It travels over the engine and meets up with the engine harness on the other side. It also powers the coils.
One thing you can do is unplug the ECU and then see if the fuse still blows. That would at least isolate it to a problem with the ECU.
One thing you can do is unplug the ECU and then see if the fuse still blows. That would at least isolate it to a problem with the ECU.
#4
Junior Member
Thread Starter
Join Date: Nov 2020
Location: Norfolk, Virginia
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Update for everyone who’s interested. The 10-12 gauge wire running from the firewall had snapped completely and I stripped, attached a new terminal and reattached. No problems yet, skeptical it was that easy though.
Thread
Thread Starter
Forum
Replies
Last Post
truespin88
2nd Generation Specific (1986-1992)
4
12-05-03 07:03 AM