Thinking about selling 20B setup
Thread Starter
Senior Member
Joined: Jul 2002
Posts: 448
Likes: 0
From: Greensboro / Charlotte NC
Thinking about selling 20B setup
EvilAviator, feel free to more this to the classifieds, but since its 20B related I figured it'd be appropriate for this section.
A lot of unexpected things have come up this summer, and I'm leaning towards selling off the parts for my 20B setup. Ideally, I'd like to sell it as a package but I will part it out if necessary. I've literally got the engine sitting in the engine bay, but I don't have everything I need to get it going and I really can't fork out the cash to finish it. What I've got is:
-20B freshly rebuilt with RA rebuilt kit and 13brew rotor housings
-Twin Turbos ported and converted to non-sequential
-Pettit Subframe and Bumpsteer Correction Kit
-Custom Intercooler and intercooler piping
-AEM C2DI 8 Channel Ignition amp, 6 MSD DIS Coils, plugs, wires
-1600cc Secondary Injectors, 550cc Primaries. Stock Primary fuel rail, custom secondary fuel rail
-FD Manual Transmission with new clutch, pressure plate and bearings
-AEM EMS engine management
I'd like to get around $3500 for the engine, which is a steal considering that its got zero miles on it and has 13brew housings.
If you're interseted PM me or Email me and I'd be happy to send whatever pictures or information you'd like. I'd love to get this stuff out ASAP
A lot of unexpected things have come up this summer, and I'm leaning towards selling off the parts for my 20B setup. Ideally, I'd like to sell it as a package but I will part it out if necessary. I've literally got the engine sitting in the engine bay, but I don't have everything I need to get it going and I really can't fork out the cash to finish it. What I've got is:
-20B freshly rebuilt with RA rebuilt kit and 13brew rotor housings
-Twin Turbos ported and converted to non-sequential
-Pettit Subframe and Bumpsteer Correction Kit
-Custom Intercooler and intercooler piping
-AEM C2DI 8 Channel Ignition amp, 6 MSD DIS Coils, plugs, wires
-1600cc Secondary Injectors, 550cc Primaries. Stock Primary fuel rail, custom secondary fuel rail
-FD Manual Transmission with new clutch, pressure plate and bearings
-AEM EMS engine management
I'd like to get around $3500 for the engine, which is a steal considering that its got zero miles on it and has 13brew housings.
If you're interseted PM me or Email me and I'd be happy to send whatever pictures or information you'd like. I'd love to get this stuff out ASAP
Last edited by johnisenglish; Aug 4, 2004 at 03:35 AM.
Thread Starter
Senior Member
Joined: Jul 2002
Posts: 448
Likes: 0
From: Greensboro / Charlotte NC
I'd be willing to take between $7,000 and $9,000 depending on how you define the "whole package." I've got a new FD tranny that I just rebuilt that has an 8lb flywheel and new clutch kit with it that'd I'd like to sell as well, AEM EMS engine manegement that I could part with for the right price, etc. I emailed you
Felix: I'm just come to realize that now is not the right time for a 20B swap, despite the fact that I have it sitting in my engine bay and less then $500 away from done. By NO means am I done with the FD, though...
Felix: I'm just come to realize that now is not the right time for a 20B swap, despite the fact that I have it sitting in my engine bay and less then $500 away from done. By NO means am I done with the FD, though...
oh johnny, i'm EXTREMELY interested!!
the only thing i dont need is the tranny and clutch kit. but everthing else is good seeing as i'm just starting.
email me and we'll talk! shaun@joshs.com
thanks
the only thing i dont need is the tranny and clutch kit. but everthing else is good seeing as i'm just starting.
email me and we'll talk! shaun@joshs.com
thanks
Trending Topics
Sorry to hear that you want to scale back. I know how it goes. I almost gave up a couple times, but i just had it sit an extra six months while I got the last few things lined up.
Good Luck on you next project
Jered
Good Luck on you next project
Jered
