I've been playing with all the numbers now for some time and I can't get my 20B to start for crap. I have to crank it for a good 5-10 seconds to get it to start. It should take 2.. can anyone post screen shots of the various settings screens for fuel by water temp and all of your ignition screens so I can see what other people are doing. I don't care if it's a 20B or a 13B anything will give me somthing to go on. Any pointers would also be great...

It Idel's great, runs to 1.2 kgcm boost with the T76 great, just won't start for ****..

 

also let me know your injector size and what fuel pressure you're running and your cranking fuel settings..

 

i can try to check my settings and try to write them up , do you have the laptop software ????
its much much easier then the handset , just have to fix my damn laptop

 

I replied to your thread you started In the Microtech Forum. Further, mostly due to alot of MT owners asking for this, I created a thread that displays all of the Stock values that are provided from Microtech themselves. Take advantage of that recent thread...It took me well over an hour to create - mostly due to making sure I did not mis-number any value.

 

I have the laptop software, dash, and Wide Band...

Silverrotor thanks for the thread, it's nice having a base to compare things to...

 

I'm glad I can help If any. Good luck.

 

cranking timing's listed in the fsm, it should be 5btdc. and then add fuel until it starts!

 

Can you add a link in here to the page you are talking about for future reference please. ( easier to find later on)

 

https://www.rx7club.com/microtech-111/tii-stock-base-maps-343297/