where can I get a manifold for 20b @?

 

In your region, it would be more cost-worthy to have it made locally.

 

I was going to ge one fabbed up here but wanted to see if anyone had one already made up.

 

I know sillbeer had a T88 on his FC and hes on mainland. He also made a thread about distributing a manifold so get in contact with him.

 

I am thinking about making some manifolds for fc with gt42. I will try and post a pic of my manifold.

 

Beginning of next year, we'll be making few.. if everything turns out ok.. It will be made professionally, equal length, SS, mandel bend, and flow tested.. person who will be making these made exhausts for pro drag cars and have flow tester to measure the flow..

 

How much you will charge?

 

I will be in the market to buy one after the 1st of the year.

 

From Amemeya they list at 200,000Y and have a t4 flange. Runners are 50mm and made from 1.5mm 304ss. Local shop is making one for me out of 3mm 304ss and using the amemeya manifold as reference. He's charging 100,000Y plus materials.

-Destin

 

when you leaving misawa? I wouldnt mind getting one also but I cant do it till after new years

 

It's complicated. As of now i'm here till the end of Dec. but may be here till June.

-Destin

 

I hear yeah. anyway keep in touch. I think the GT42 is the way togo. do you know if it will fit on the amemiya manifold? just woundering what the size differance is between a T88 VS GT42. you going to use a 50mm wastegate too?

 

Also, contact dragon, hes in oki with the yellow FD with a 20b in it. I think he made his...

 

yeah he live maybe 3 min from me.

 

I'm pretty sure the gt42 will fit just fine. I'm not sure what the differences are between the 2 turbines. I believe the T88 is 72mm. Someone correct me if i'm wrong because i'm not sure and I don't think there is any solid information on the greddy turbines. For wastegate I have a sard type J 50mm. Seemed to work just fine. Didn't have any boost spiking or and boost lose.

-Destin

 

Doesn't A-Spec make one just for the GT42 and a 20B? You may want to drop them a line.

 

-

 

Here is pics of my manifold. Sorry for taking so long i had more but still can find them.

http://www.can-saf.com/modules.php?s...view_album.php

 

thanks for the pics of the manifold

 

You said that your dad may duplicate that manifold? How much? Do you think it will fit an Fd?

 

I've found that most times manifold built for FC's will not fit in FD's because there is more room to work with in a FC. If the FC manifold is built with the runners close to the motor then it might work, most times on the FD the runners have to move forward then up

 

If thats all thats needed I wouldn't have any problem cutting the manifold at the flange and redirecting the runners so it would fit the Fd. This shouldn't be that hard to do.

 

those picture do no justice for that manifold..its very smooth flowing.. and the welds are all seemless..it looks stunning in person..like it was all one piece!

 

I would love to see it. can you take it off and ship it here to me in Okinawa :P