Dave's First gen 20B - a work in progress...
02-18-16, 07:52 PM
#154
Full Member
Thread Starter
Ready to go... Just need to weld a slight bend on the comp cover to align the I/C piping...
Then work out how Im going to set up the W/I...Maybe mount the nozzle in an airbox or in some 4" pipe from a pod filter...
Then work out how Im going to set up the W/I...Maybe mount the nozzle in an airbox or in some 4" pipe from a pod filter...
Last edited by stokrx; 02-19-16 at 02:24 AM.
[/URL]
03-08-16, 04:49 AM
#157
Full Member
Thread Starter
03-23-16, 03:31 AM
#160
Full Member
Thread Starter
05-14-16, 05:22 AM
#164
Full Member
Thread Starter
Started making some progress on my WI tank, next up is to work the mounts.
[/URL]
Got the car on some scales too
[/URL]
Finally got the car to the strip,!
I have been looking forward to having a run for some time!
[/URL]
Best times of the night were 12.3 @ 131 and 12.1 @129.
Very happy with the MPH, looking forward to getting some decent rubber on the rears and bring the times down!
[/URL]Got the car on some scales too
[/URL]Finally got the car to the strip,!
I have been looking forward to having a run for some time!
[/URL]Best times of the night were 12.3 @ 131 and 12.1 @129.
Very happy with the MPH, looking forward to getting some decent rubber on the rears and bring the times down!
05-15-16, 08:22 PM
#166
Full Member
iTrader: (2)
Join Date: Jul 2012
Location: Miami
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
Congrats.. Great miles per hour mate.... You have a beast...love everything about your car, no cut corner everything done the right way... l hopefully one day I can do the a 3 rotor on my FB ... Your car is a real inspiration to go that route ..
10-16-16, 12:58 AM
#168
Full Member
Thread Starter
Been ages since any updates... Still setting up the WI, finished the tank and had it powder coated, just need to set up the spray nozzle.
Bought a FC brake upgrade it, so now I can stop!
All mounted up.
Put some new oil in the R154, thought I'd try the Redline Heavy Shockproof...works a treat.
Picked up some MT's too
Still loving the car, 20B's do ALWAYS bring a smile to your face when you drive them!!
-Dave.
Bought a FC brake upgrade it, so now I can stop!
All mounted up.
Put some new oil in the R154, thought I'd try the Redline Heavy Shockproof...works a treat.
Picked up some MT's too
Still loving the car, 20B's do ALWAYS bring a smile to your face when you drive them!!
-Dave.
09-03-17, 04:50 AM
#172
Full Member
Thread Starter
Well it's been ages since any updates... Was deployed OS for seven months.
I've a few things in the works atm. But the first thing when I got back was an oil change.
The take her for a thrash.
I'm up-grading the exhaust housing to a 1.10 (from a 1.00) I maxed out the old turbine housing, so for the cost this should yeld more flow and some cheap power gains.
old v new
I've had them off to the ceramic coaters too.
Been chipping away at the air intake too, which Im setting up with mechanical Water Injection, I've nearly finished. The intake is flanged at the inner guard. A pod filter will attach to the shorter end.
I'm really looking forward to getting some WI into this set up, nearly there!
-Cheers Dave.
I've a few things in the works atm. But the first thing when I got back was an oil change.
The take her for a thrash.
I'm up-grading the exhaust housing to a 1.10 (from a 1.00) I maxed out the old turbine housing, so for the cost this should yeld more flow and some cheap power gains.
old v new
I've had them off to the ceramic coaters too.
Been chipping away at the air intake too, which Im setting up with mechanical Water Injection, I've nearly finished. The intake is flanged at the inner guard. A pod filter will attach to the shorter end.
I'm really looking forward to getting some WI into this set up, nearly there!
-Cheers Dave.
10-05-17, 03:54 AM
#173
Full Member
Thread Starter
Nearly finished putting the car back together again..just have to sort the WI and i'll be cooking!
Had the Plenum and cooler piping ceramic coated and painted the throttle body black.
A slight visual change, but i'm happy with the look. I put some exhaust wrap on the dump pipe too.
Need to pick up a turbo beanie and get another tune too.
Had the Plenum and cooler piping ceramic coated and painted the throttle body black.
A slight visual change, but i'm happy with the look. I put some exhaust wrap on the dump pipe too.
Need to pick up a turbo beanie and get another tune too.
05-01-18, 10:03 PM
#174
What psi and hp did you max the s369sxe at with the 1.0 a/r?
And where did you find a 1.10 housing for it?
The largest I can find is the 1.0 twin scroll or .96 open scroll.
And where did you find a 1.10 housing for it?
The largest I can find is the 1.0 twin scroll or .96 open scroll.
