Hi i have a Microtech ecu, anybody know whats a safe Timing map to put in ? i am using one from a 13B 2 rotor with 20" in the low rpms and 25" from 2000rpm and up but it seems like its a little misfiring in the higer rpms so maby the Timings diffrent in the 20B 3 Rotor ?
The engine itself is bone stock

 

I believe you need to send the unit back to Microtech to be reconfigured for the 20B, there are some hardwired parameters internally that can not be adjusted by the user.

 

when i did mine i had TDC marked for all 3 rotors on the pulley, you NEED to make sure that the timing is correct for all 6 plugs

 

sorry i ment the ecu is for a 20b but i put the data from this 13b map on manually and now i cant remember the stock 20b map, the fuel data is the only thing i dident change idle/load.
its from screen 23 and op i need help with

mild port

 

Bump
is screen 23 + 24 Okay to use ?

 

Okay the Timing will be ok to drive with until i get a Motec.
75% Throttle http://tinypic.com/player.php?v=2vmbyn4&s=5