20b audio & video clips!
Thread Starter
Joined: Apr 2002
Posts: 6,719
Likes: 26
From: Midland Texas
20b audio & video clips!
If you find any 20b audio/video clips, please link them here. Maybe we can add some additional stickies in this section?
Last edited by t-von; Dec 6, 2004 at 11:13 PM.
Thread Starter
Joined: Apr 2002
Posts: 6,719
Likes: 26
From: Midland Texas
Here is couple from David Hayes Pettit Banzai just recently completed. This is with Pettit resonated mid-pipe and Pettit cat-back. Enjoy!
http://mindclarity.com/cloead/120-2057_MVI.AVI
http://mindclarity.com/cloead/120-2059_MVI.AVI
http://mindclarity.com/cloead/120-2057_MVI.AVI
http://mindclarity.com/cloead/120-2059_MVI.AVI
Last edited by t-von; Dec 6, 2004 at 11:10 PM.
Here's a brief audio clip of mine (it's a zipped MP3).
https://www.rx7club.com/forum/attach...chmentid=84833
https://www.rx7club.com/forum/attach...chmentid=84833
Thread Starter
Joined: Apr 2002
Posts: 6,719
Likes: 26
From: Midland Texas
Thread Starter
Joined: Apr 2002
Posts: 6,719
Likes: 26
From: Midland Texas
Two more!
http://fc3spro.com/PICS/SKY20B/20b01.mpg
http://fc3spro.com/PROJECTS/SKY/20B/VIDEO/sweeper01.avi
http://fc3spro.com/PICS/SKY20B/20b01.mpg
http://fc3spro.com/PROJECTS/SKY/20B/VIDEO/sweeper01.avi
Last edited by t-von; Dec 7, 2004 at 09:46 PM.
Trending Topics
Thread Starter
Joined: Apr 2002
Posts: 6,719
Likes: 26
From: Midland Texas
Last edited by t-von; Dec 7, 2004 at 11:37 PM.
Here is a couple of mine. I am still looking for my other ones they are a little better
http://www.can-saf.com/modules.php?s...view_album.php
http://www.can-saf.com/modules.php?s...view_album.php
http://fullshow.tripod.com/Dyno.wmv
You guys wanna see some real 3 rotor power, then click on this sucker!!! 730 hp to tire @ 20 psi on Methenol!!! It's a rather large file so be patient.
You guys wanna see some real 3 rotor power, then click on this sucker!!! 730 hp to tire @ 20 psi on Methenol!!! It's a rather large file so be patient.
Originally Posted by Mr. LV
http://fullshow.tripod.com/Dyno.wmv
You guys wanna see some real 3 rotor power, then click on this sucker!!! 730 hp to tire @ 20 psi on Methenol!!! It's a rather large file so be patient.
You guys wanna see some real 3 rotor power, then click on this sucker!!! 730 hp to tire @ 20 psi on Methenol!!! It's a rather large file so be patient.
Thread Starter
Joined: Apr 2002
Posts: 6,719
Likes: 26
From: Midland Texas
Originally Posted by Mr. LV
http://fullshow.tripod.com/Dyno.wmv
You guys wanna see some real 3 rotor power, then click on this sucker!!! 730 hp to tire @ 20 psi on Methenol!!! It's a rather large file so be patient.
You guys wanna see some real 3 rotor power, then click on this sucker!!! 730 hp to tire @ 20 psi on Methenol!!! It's a rather large file so be patient.
Wow that was absolutely the best dyno footage I've ever seen.
Originally Posted by Red-Rx7
Not too shabby. Mine should do the same at 1 bar with my new turbo on 93 octane pump gas.
Mods are in the signature link to my car's garage page. You can access them here: https://www.rx7club.com/vbgarage.php?do=view&id=26
At 13.6psi of boost, the car made 628.8 rwhp; while stopping early in the RPM band (we stopped at 6100 rpm's). There is a video of the dyno floating in the forum.
This was done on a T72 dual ballbearing turbo (Q Trim, 1.32 AR). I have since changed to a T76 turbo, leaving the other stuff the same. The T76 flows about 10lbs more air at any given point, than the T72.
At 13.6psi of boost, the car made 628.8 rwhp; while stopping early in the RPM band (we stopped at 6100 rpm's). There is a video of the dyno floating in the forum.
This was done on a T72 dual ballbearing turbo (Q Trim, 1.32 AR). I have since changed to a T76 turbo, leaving the other stuff the same. The T76 flows about 10lbs more air at any given point, than the T72.
Thread
Thread Starter
Forum
Replies
Last Post
Prediict
2nd Generation Specific (1986-1992)
32
Nov 18, 2015 08:41 AM




hehe :burnout:

