20b 15psi street port
Thread Starter
Junior Member
Joined: May 2009
Posts: 11
Likes: 0
From: california
20b 15psi street port
Im looking on getting a 20b and running stock twins with a street port. I need around 550bhp and streetable (i have a very loose definition of this haha)
Do I need bigger injectors to run at 550horse? and would the stock computer compensate for this? (I know you need the stock computer to run the twins so how are people doing this?) Would stock apex seals work? if not i found 2mm racing apex seals which should do fine.
Do I need bigger injectors to run at 550horse? and would the stock computer compensate for this? (I know you need the stock computer to run the twins so how are people doing this?) Would stock apex seals work? if not i found 2mm racing apex seals which should do fine.
you are going to need an aftermarket ecu. (which you need anyway unless you want to run the stock auto trans)
on top of that, you will need a medium size turbo and at least the exhaust ports opened up.
on top of that, you will need a medium size turbo and at least the exhaust ports opened up.
Thread
Thread Starter
Forum
Replies
Last Post
