1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Working on a 1980 RX-7, Here's the Starting Photos/Progress Photos

Thread Tools
 
Search this Thread
 
Old Apr 4, 2011 | 07:15 PM
  #1  
kruk6505's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2011
Posts: 14
Likes: 0
From: MA
MA Working on a 1980 RX-7, Here's the Starting Photos/Progress Photos











Reply
Old Apr 4, 2011 | 07:20 PM
  #2  
DivinDriver's Avatar
1st-Class Engine Janitor
Tenured Member 10 Years
iTrader: (15)
 
Joined: Jun 2008
Posts: 8,376
Likes: 28
From: Chino Hills, CA
Is that a Limited? I see the sideplates but can't read them in the glare.

I also see the power mirror controls.

Is it a Cali build? Engine bay needs a lot of work, but looks original right down to the hose clamps.
Reply
Old Apr 4, 2011 | 08:15 PM
  #3  
FunK73's Avatar
Fighting Global Cooling
Tenured Member 05 Years
iTrader: (6)
 
Joined: Mar 2009
Posts: 983
Likes: 0
From: Minneapolis, Minnesota
Looks like it says "Anniversary X" something. Looks like a fun bit of work ahead of you! Gotta love a nice clean SA though. Got any big plans? Restoring it to show room stock? Or sine fun go faster bits?
Reply
Old Apr 4, 2011 | 08:34 PM
  #4  
rx71king's Avatar
the diabolical one
Tenured Member 05 Years
iTrader: (6)
 
Joined: Jul 2005
Posts: 939
Likes: 1
From: queens n.y.
battery is growing mushrooms on it.........good luck.
Reply
Old Apr 4, 2011 | 09:44 PM
  #5  
ourxseven's Avatar
1/1 scale Hot Wheels
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Feb 2006
Posts: 1,660
Likes: 6
From: winnipeg, Manitoba
love to see another SA on the mend . There sure has been a lot of threads about them lately

but those two spoke steering wheels sure look funny to me ......... like they should be on a bus . both my 79's had the four spoke wheels
Reply
Old Apr 4, 2011 | 11:57 PM
  #6  
DivinDriver's Avatar
1st-Class Engine Janitor
Tenured Member 10 Years
iTrader: (15)
 
Joined: Jun 2008
Posts: 8,376
Likes: 28
From: Chino Hills, CA
Ah so it's an 80 X Anniversary Ed. (10th anniversary). Definitely worth restoring, if it's not too chopped up.

The 2-spoke wheels were factory on some builds. I've seem em in the parts manuals.
Reply
Old Apr 5, 2011 | 03:48 AM
  #7  
7aull's Avatar
RX HVN
Tenured Member 15 Years
iTrader: (2)
 
Joined: Jan 2003
Posts: 3,889
Likes: 229
From: Arizona
Yoik! "S" budget steering wheel! Intentional or came with the car? (meaning installed by prev owner) 10AEs came with the 4-spoker of course. Looks like a solid car, and a Special too boot! Congrats and good luck. Another SA joins the Fold. More pix and give us some Back Story on how you got it and what are your plans?

Stu Aull
80GS
Alaska
Reply
Old Apr 5, 2011 | 05:27 PM
  #8  
kruk6505's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2011
Posts: 14
Likes: 0
From: MA
Originally Posted by DivinDriver
Is that a Limited? I see the sideplates but can't read them in the glare.

I also see the power mirror controls.

Is it a Cali build? Engine bay needs a lot of work, but looks original right down to the hose clamps.
Yep it's a limited and im a weekend mechanic that's learning as he goes so i dont know if it is a cali
Reply
Old Apr 5, 2011 | 05:31 PM
  #9  
kruk6505's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2011
Posts: 14
Likes: 0
From: MA
Originally Posted by FunK73
Looks like it says "Anniversary X" something. Looks like a fun bit of work ahead of you! Gotta love a nice clean SA though. Got any big plans? Restoring it to show room stock? Or sine fun go faster bits?
im just restoring it to get it back on the road, and for everyone else, everything is original, but the radio is replaced.

Also i have been working on it for about a month so it's getting there, the battery is a mouse bed (i know, mice in the engine isn't good lol).
Reply
Old Apr 6, 2011 | 06:55 AM
  #10  
t_g_farrell's Avatar
Waffles - hmmm good
Tenured Member: 20 Years
Community Favorite
iTrader: (1)
 
Joined: Jul 2004
Posts: 9,250
Likes: 464
From: Lake Wylie, N.C.
Hmmm, should clean up nice.

Whats that chrome looking *** sticking out on the driver side fender? An alarm
switch maybe?

Also in the close up of the emblem on the same fender shows a small protuberance right
after the rx7 emblem. Looks like a rivet filling a hole maybe. Interesting.

Keep us posted on the progress.
Reply
Old Apr 6, 2011 | 10:06 AM
  #11  
DivinDriver's Avatar
1st-Class Engine Janitor
Tenured Member 10 Years
iTrader: (15)
 
Joined: Jun 2008
Posts: 8,376
Likes: 28
From: Chino Hills, CA
Originally Posted by kruk6505
Yep it's a limited and im a weekend mechanic that's learning as he goes so i dont know if it is a cali
I mis-read the plate at first - looked like the old yellow-on-blue Cali plate at first glance, but I see now it's NJ.

What's the little pimple just aft of the fender logo? An LED?
Reply
Old Apr 6, 2011 | 08:04 PM
  #12  
kruk6505's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2011
Posts: 14
Likes: 0
From: MA
Originally Posted by 7aull
Yoik! "S" budget steering wheel! Intentional or came with the car? (meaning installed by prev owner) 10AEs came with the 4-spoker of course. Looks like a solid car, and a Special too boot! Congrats and good luck. Another SA joins the Fold. More pix and give us some Back Story on how you got it and what are your plans?

Stu Aull
80GS
Alaska
Well it is my dads and me and him have been working on it. He got it over 20 years ago and had to put it in the garage after my sister was born because it's a two seater. He go it from (This is what he told me) a friend that was like a "brother" to him and his friends son had been trying to sell it and he bought it because they were so close.
Reply
Old Apr 6, 2011 | 08:08 PM
  #13  
kruk6505's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2011
Posts: 14
Likes: 0
From: MA
Originally Posted by DivinDriver
I mis-read the plate at first - looked like the old yellow-on-blue Cali plate at first glance, but I see now it's NJ.

What's the little pimple just aft of the fender logo? An LED?
The Little Bump after the logo is an LED that lit up when the alarm was turned on, which was turned on by the little silver bumb that's next to the logo. You would have to lift a little rotating door that shows a key hole, etc. (Can only see it from a distance on the other photos.)
Reply
Old Apr 6, 2011 | 08:33 PM
  #14  
kruk6505's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2011
Posts: 14
Likes: 0
From: MA
So Far, this is the progress pictures. The big black blob looking thing is the gas tank, the metal wheel looking thing is where the gas tank should be because i had to take it out to drain it. and the engine changes is just a new distributor cap with new wires, spray painted radiator, no more battery (I think 20 year old batteries don't hold up... that's just me :P) but here you got, this is about a month or so into the repair, the interior and looks (Paint, mold, etc.) has not been changed yet.









Reply
Old Apr 7, 2011 | 10:26 AM
  #15  
jpieps's Avatar
Full Member
 
Joined: Mar 2010
Posts: 111
Likes: 0
From: MN
I like this car. I haven't seen one of the 10 AE ones yet. Very cool.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sherff
Adaptronic Engine Mgmt - AUS
9
Feb 24, 2019 12:09 PM
KAL797
Test Area 51
0
Aug 11, 2015 03:47 PM




All times are GMT -5. The time now is 10:10 PM.