Who's turbo fb is this? (second gen vert wheels)
#1
Rotary Freak
Thread Starter
Who's turbo fb is this? (second gen vert wheels)
Anyone know who's car this is? I'm curious if this car used the REspeed mark 1 brake kit front and back to get the 5 lug pattern. Also, I would like to know if wheel spacers were needed? IF so, what size? Thanks
#3
Rotary Freak
Thread Starter
#6
I can has a Hemi? Yes...
iTrader: (2)
Trending Topics
#9
No, it is not stock!
iTrader: (1)
Spacers
"FYI, You will need spacers to clear the calipers."
Well, I did my own adapters, although I assume it is pretty close to the CP or others as far as spacing out from the strut. I only needed spacers in the front, to keep the tires from rubbing on the strut. The rears did not require spacers. I am running 205/50 front, 225/50 rear tires. Some detail photos are shown on my Cardomain page.
I cannot remember the numbers, but I looked at a lot of aftermarket wheels, and they all weighed more than these BBS wheels.
Well, I did my own adapters, although I assume it is pretty close to the CP or others as far as spacing out from the strut. I only needed spacers in the front, to keep the tires from rubbing on the strut. The rears did not require spacers. I am running 205/50 front, 225/50 rear tires. Some detail photos are shown on my Cardomain page.
I cannot remember the numbers, but I looked at a lot of aftermarket wheels, and they all weighed more than these BBS wheels.
#11
Say hello to Mr.Wankel
iTrader: (7)
buy the respeed kit. he takes care of everything for you. you can use the stock ebrake lines. how do i know? ive got them.
www.re-speed.com
www.re-speed.com
Thread
Thread Starter
Forum
Replies
Last Post
josef 91 vert
2nd Generation Specific (1986-1992)
23
09-03-15 11:20 AM