Whoops! flood
#2
standard combustion
Join Date: Dec 2001
Location: Twin Cities Minnesota
Posts: 1,374
Likes: 0
Received 0 Likes
on
0 Posts
Take off the "engine" fuse. Hold the throttle to the floor and run the starter for 10-15seconds so the float bowl will empty out and will clear out the gas. Then reinstall the fuse and start it. If it does this again, repeat and then try starter fluid down the carb before you start it.
#3
roadkill hats rock
Join Date: Jul 2001
Location: Austin, Texas
Posts: 1,396
Likes: 0
Received 0 Likes
on
0 Posts
first thing i try is unplugging the fuel pump and crankin it til it wants to kick over. if that doesnt work you have to take the plugs out and crank it over a few times to clear it out. then try and start with no pump, when it starts i plus it back in
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
FbFuninthesun
New Member RX-7 Technical
3
10-06-15 08:03 AM
PinkRacer
2nd Generation Specific (1986-1992)
43
10-01-15 09:13 AM
Adaptronic 1280s Hot Start 3 Rotor 20b RX7
Monsterbox
Adaptronic Engine Mgmt - AUS
5
09-11-15 03:29 PM