mjm4jc

I can't find that detailed thread/link about how to install the S5 intake in a GSL-SE. Can anyone help?

Mike

85 FB

Is this what you were looking for?
https://www.rx7club.com/1st-generation-specific-1979-1985-18/better-intake-s4-s5-707962/

mjm4jc

Unfortunately this is not the one. This is where it kind of took off though. There was another thread where someone included a step by step procedure with pics to do the swap. Thanks anyway.

Mike

85 FB

Okay, I'm not sure if these'll help, but I figured I'd post them up just in case. The Searching function is hard to pinpoint exact threads that focus on the S5 intake install.

https://www.rx7club.com/1st-generation-specific-1979-1985-18/s3-s4-intake-mod-713331/
https://www.rx7club.com/1st-gen-archive-71/got-se-you-gotta-do-mod-169237/

85 FB

I just found this. It's not a How-To but a service the guy offers. However, maybe you can contact him for some information.

http://www.rotaryresurrection.com/1s...ntakeswap.html

RW-7

iTrader: (56)

I've been looking for thse threds for a while now, but unfortunatly all I can find is what is posted above. I don't think anyone has done a step by step write up on this mod yet. I am actually in the process of s3 to s4. I chose the s4 because the s5 seemed more complex and only about a 5 hp gain from s4 to s5. 10 to 15 is plenty for me. Good luck and if you find anyting let us know.

mjm4jc

Thanks guys for all your help. The thread that I was looking for was one of the two threads that 85FB included in his post. It turns out that the detailed post I was looking for was actually for the S4 mod, not the S5. Anyhow, it was the one I was looking for.

Mike