what's the difference between sa22c and a fb?
#2
Eats, Sleeps, Dreams Rotary
iTrader: (17)
There's a lot of differences in the U.S. The SA is the 1979-80 rx7s. FB are from 1981-85. It's all from the vin number. Same with 2nd and 3rd generation cars. It tells you all about about it in the FAQ page. Lots of good stuff in there. Check it out. Might answer a lot of questions you might have.
#4
emissions r teh sux
iTrader: (2)
Join Date: Dec 2005
Location: Stockton Ca
Posts: 888
Likes: 0
Received 0 Likes
on
0 Posts
Lol aside from the chrome bumpers on the sc there are some major differences. One of the most notable being that the sa had a thermal reactor for the exhaust. Secfond, there was no disc brake option for the rear end. Third is the dash and interior pieces. 4 would be that the distributor had points instead of the electronic ignition on the fb. There was also a much more tolerable emissions set up on the sa. The sa in 79 had a 6 month waiting list here in northern california when it first hit the market ( my hr manager got one and waited) whereas the fb had no waiting list that I'm aware of. More can be found by reading the faq and the archives
#6
1st-Class Engine Janitor
iTrader: (15)
4 would be that the distributor had points instead of the electronic ignition on the fb.
More can be found by reading the faq and the archives
Thread
Thread Starter
Forum
Replies
Last Post
Shainiac
Single Turbo RX-7's
12
07-17-19 02:20 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
Captain Hook
2nd Generation Specific (1986-1992)
8
09-22-15 01:12 PM