1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

What should the oil pressure be at...?

Thread Tools
 
Search this Thread
 
Old Sep 21, 2003 | 01:07 AM
  #1  
naugrim's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Sep 2003
Posts: 22
Likes: 0
From: Moncton, New Brunswick
What should the oil pressure be at...?

What should the oil pressure gauge reading be on a 12A at idle?

i just noticed tonight that at idle it's not really showing very much, but as i rev the engine it increasesthen decreases as i let go of the rev, is this normal?
Reply
Old Sep 21, 2003 | 01:48 AM
  #2  
naugrim's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Sep 2003
Posts: 22
Likes: 0
From: Moncton, New Brunswick
i searched through my manual, and searched the forum, and even tryed serching on the web, but could not actually find info concerning this.

I hope someone out there does.
Reply
Old Sep 21, 2003 | 02:22 AM
  #3  
fatboy7's Avatar
Got Boost?
Tenured Member 15 Years
 
Joined: Feb 2002
Posts: 1,066
Likes: 1
From: Watertown, MA
Your pressure should increase with rpm to a point. I don't remember the exact specific, and I don't have the Factory Service manual handy, but IIRC the pressure should go up to the 60 psi line (the middle one) at or before 3k rpm constant revs. Typical on my sevens' for idle is about half way between the low mark, and the next mark up.
Reply
Old Sep 21, 2003 | 09:17 AM
  #4  
RacerX7fb's Avatar
paradox
Tenured Member 05 Years
 
Joined: Oct 2002
Posts: 1,296
Likes: 2
From: SoCal
The Racing Beat manual/catalog says:
Oil pressure in a stock engine ranges from 20 to 40 PSI at idle RPM. Above 3000 RPM oil pressure is approximately 70 PSI (the rear pressure regulator is set at 71.1 PSI), but may drop about 10 PSI above 4000 RPM due to oil foaming.

Sometimes dirt on the contact point of the sending unit can cause less accurate readings... pop the wire off and clean it. I know in my cars case that the oil pressure sending unit went bad
Reply
Old Sep 21, 2003 | 09:36 AM
  #5  
RotorMotorDriver's Avatar
Seven Is Coming
Tenured Member 20 Years
iTrader: (1)
 
Joined: Dec 2001
Posts: 6,503
Likes: 4
From: Washington
Hey RacerX7fb, my girlfriend has a cat named Big Red, lol. Odly enough its orange and small, but meh, whatever, I didnt name it . Interesting avatar either way...

~T.J.
Reply
Old Sep 21, 2003 | 11:02 AM
  #6  
naugrim's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Sep 2003
Posts: 22
Likes: 0
From: Moncton, New Brunswick
Thanks guy's, i just woke up checked the forum.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Snoopy FD
Build Threads
25
Dec 8, 2015 01:45 PM
andyvideopro
General Rotary Tech Support
3
Aug 20, 2015 10:55 AM




All times are GMT -5. The time now is 04:29 PM.