While doing a brake swap my bonehead decided to lose a washer(too lazy to take off the other side, probably the most time consuming part of the swap). Here the pics:



Will one washer actually make a big difference to the function of the car?
Right now, it's using a temp washer so if anyone know the size, it'd help much.

 

Does this help any?

http://www.blackdragonauto.com/icata...ll.asp?page=63

 

#30 in the black dragon picture is what your looking for,

but the part is called a steering knuckle.

 

Thanx, but I want to order one.

 

If you are referring to the lock washer that goes onto that bolt. Go down ot the hardware store and buy one. It is nothing special.

 

What size?

 

I don't remember off the top of my head but it seems to be around the 12-14mm. Jus take a tape measure and measure across the width.

 

...or you could simply take the bolt to the store and match it up

 

That's what I did.

 

Replace your ball joint next, the boot is torn so its life span is limited.

 

^^^ Thanx

lol Where can I find new ball-joints?

 

UHHHH Mazda, NAPA, PepBoys, Checkers, or any other parts stores, you have in the US, hell maybe try the FS section?

 

At the place that sells them of course.



try blackdragonauto
rockauto