And how do you like the set up you have??

would you do it different next time??

im looking in to doing a tii rad. with fd fans and i dont know what controler yet. what do you guys think?

FYI. im running a stock 12a with a s4 turbo, fmic, fmoc and a holley 600, and i want to keep the ac as i do live in phoenix.

 

ive had the same setup for years and i love it. ive never had a problem with overheating.
Im using a Pontiac Fiero fan that i grabbed from a junk yard ($20-$30), it is almost a perfect fit, just sits 1/2 inch lower than the radiator. I also bought an adjustable thermostat from BlackDragon Automotive, no more than $30

 

will a gen 2 radiator fit in an FB? i know that they are slanted in the engine bay of an FC. this is something that i would like some info on and maybe try. i am planning on a turbo set up and looking for ways of better cooling.

 

Taurus fan, my finger.

Got it rigged to a switch. When it gets warm, flick it on.

 

Black magic 180sx triggered on by the microtech LT10's, stock thermostat.

 

I have a Derale controller that is set to turn the fan on at 180 degrees. I've never had any problems with it. It also came with everything needed to install it properly. The wiring, the probe, the relay, and the relay harness were all in the box.

 

1st Gen MR2 fans with a $18.00 fan controller from Autozone. Works great, no issues.





.

 

thanks guys. i have the fd fans i got for $20 and im getting the tii rad this weekend. ill have some time off in a week or two and ill pick up a fan controller, sounds like eney one should work just fine.

im liking the BD adjustable one, but $18 sounds good to.

thanks.