I want a set too! I have $150 sitting here waiting to be spent on something

Please let me know how to pay!!

 

Me too! Money is ready to go when they are ready.

 

Bump! Desperately want to buy!!!

 

I will have details on these within hours. I think we have enough to crank up a group buy to keep the price the same.

-billy

 

First run batch of parts are in and everything worked out as suspected. We have 4 sets of these first run batch that are accounted for (PM's have been sent to those of you). If you guys want a group buy on these let me know and I will set it up.

We currently offer plates for Rx3, 1st generation and 2nd generation. These use the standard 5/8 (.625) bearing that all camber plates on the market use. If orders are placed you will need to let us know what spec shock you will be running so we can ship the appropriate spacer with the kit. All hardware for mounting is included, there are thrust bearings with the kit as well they are just not pictured.

-billy

 

Please set up the group buy asap! I've been needing camber plates since before I've had my car

BTW, if I intend to use the camber plates with my current Tokico blue shocks, and then in a couple months build a coilover setup using Tokico Illumina's, then do I just remove the spacer provided in order to fit with the Illumina's? Also, will I need an upper spring perch either for stock "style" springs or with 2.5" ID springs?

 

money in hand.....well paypal.

 

Billy, do these have incriments notched in for repeatable changes to settings? Also, if possible, i would like mine with no powder coating, want to do custom color(the car is black).
Thanks again.

 

These are not marked. Most racers find the optimum settings for there setups and mark the plates to help line them back up roughly. Then use a camber gauge to double check and fine tune the camber.

Sure I can leave yours bare.

-billy

 

Please add me to the list for a 1st gen set. Thanks

 

GB has been posted in the GB section.

-billy

 

Billy, I must have missed it, I don't see a GB for Camber Plates in the GB section.
Is it called something other than GB Camber Plates???
Thanks!

 

Never mind, 3rd time through and I found it...doh!

 

Bump for this... people, go post in the ground buy thread!!

 

GB Ends Friday Night. Make sure to check it out.

-billy

 

Has anyone tried the K-MAC plates? See k-mac.com part number 481116J b/c
I had a look at a display unit at the SEMA show and they seem to be well made. They did not have the specific unit for a first gen at the show. It appears they will handle a substantial range of castor/camber. Even greater if you go to coil overs.
Dennis L. Cote, Delhi, CA